Hi guys.
I made this https://www.instructables.com/id/Arduino-Powered-Headdress/
the elettronics works at 5volts and drain max 4 amp.
My needs is a battery pack easily rechargable and smaller as possible'.
I would like to cahrge it from usb
can you suggert me a setup?
this is what Ia m...
thank you very much for this link.
I managed to find the 2014 version for 40 euro instead of 60.
So I am thinking to go for 2014 considering the very small improvment in the 2015 ver.
thx
If I undestand correctly there are 4 versions of "EA41"
ea41 warm white 2014 960 lumens
ea41 cold white 2014 960 lumens
ea41 warm white 2015 with 1020 lumens
ea41 cold white 2015 with 1020 lumens
I found some good prices here...
Hi all!
I woild like to buy a good flashlight for controll my house at night. My garden is 100 meters max lenght.
I would like a rugged led light can stanf under rain safely
Regarding battery I have a lot of aa eneloop battery so this could be the way to go but I also like flashlights with...
Hi all,
I need a flash light that I will use in my home and garden for emergency and general purpose applications ( flood ? ).
I 'd prefer an AA cells light , I would like to use with enelop one.
I usually buy such thing in DX.com for the free shipping , but ant shop would be ok , I prefear...
yes I was thinking something similar too , but I would like to keep a more alternative design. at the end I don't want the "classic" light for painting
This is the painting the light is for:-)
Instead I am planning to use the leds for another light similar to this
Mhmm...good idea, I could use 2 or 3 20W mr11/mr8 spot...easier.
Thank you ...maybe my leds will stay in my basement for a little while.
Can you tell me the gauge of the wire I have to buy if I'll go with the mr11 option?
THANK YOU ALL!!!
If I understand I'll need another type of led if I don't want to use heat sink....right?
I would like to use the one I stated 'cos they are laying around in my basement with no use :-)
I am planning to use this one driven at about 350mA
http://ledsupply.com/xreww-l1.php
# Warm-White XR-E Cree Emitter Features: 73.9 lm @ 350mA
# 1000mA - Max Drive Current
# 3.3Vf - Typ. Forward Voltage @ 350mA
# 2900K - Color Temperature
# Lambertian Radiation...
You are right! great idea , can you tell me the minimum suggested thick for the copper wire?
The led I would like to use will be drived at about 300mA..
Thank you very much for your help:thanks:
Thank you guys I didn't know the term "enameled".
Can you tell me if I can use one enameled wire and one galvanized wire for each led?
I have problems finding wires big enough to stay up by themselves
Can someone take a look at this interesting light?
http://www.instructables.com/id/DIY-Copper-Style-LED-Painting-Illuminator/
I would like to make it but I am worried 'cos it seems to me that twisting the 2 wire together like stated in this project will result in a short circuit...
Am I wrong??
Thank you guys.
I would like to put a led on the side of the stair every 2 or 3.
I only need it for illuminate the stairs.
I don't know how explain , here in Italy this kind of illumination is called "signsteps" meaning the light is used only for to see were to put the feet every step :-)...