A microstream aaa clip with the clip cut off will clamp right on the head . There $2 and you can also just put the whole clip on the head and it will ride lense up .
I have a small construction business and carry a proteck sprint knife and a lumintop tool aaa . They are both small and are on me everyday! I modified the cu tool with a piece of 1/2" copper tubing to shroud the tail cap from coming on while working ( cut it with a tubing cutter and blue lock...
Re: More drops: A bunch of lights - Surefire, Foursevens, Manker, Olight
the modes your describing are skylumin , it just might me an unmarked toolvn. Just something to check , you might pull the head and compare it to a regular tool . Thanks Joe
OK function over form ! Hot knifed bay 4 , it now fits but just by a little. Took an old steak knife and the map gas torch ,heated the tip and hot cut the back of the bay out . The plastic is over 1/8" thick and open after that . I only cut out enough so that the slide fits , there is a stop on...
Protected 20700 do not fit the miboxer C4-12 ! The Acebeam 4250mha protected 20700 is to long for the charger . The Sanyo ncr20700b fits , I may have to cut out the plastic in one bay so the slide can go back farther , it looks like it could work. Other than that the charger is great , it's...
Re: FS: Light from my Youtube Channel. Olight, Lumintop, Nitecore, and more.
I would take the Jett er0r bundle and the EDC25 I will send a pm with details. Thanks Joe
Hi
I'm new to the forum and have gotten a little wild with purchases lately . I had old jetbeams and aw18650 with a ultra fire charger. I picked up a few AA and AAA lights and eneloop battery's with the charger. So I bought a used acebeam K40vn , a X65vn and now a L30 vn with the USB port...