Recent content by mrQQ

fenix-store
  1. mrQQ

    17670 - anyone still sell me?

    any online shops?
  2. mrQQ

    17670 - anyone still sell me?

    Is it possible to order some online, with shipment to Europe? Thanks
  3. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    what about termination voltage etc?
  4. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Hello, what are proper settings for charging IMR cells? Thank you.
  5. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer I've tried that, but it also results in "Check Voltage" message...
  6. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Re: SkyRC — IFA 2014 / CES 2016 — MC3000 charger-analyzer guys, how can I try to revive deeply discharged li-ion with this? it says check voltage and does nothing :(
  7. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    hm, at first voltage drop was consistent, but nearing the end this is how it looks now:
  8. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    I just noticed that 3.2.5 is out, and gonna try it now. Will see how it goes. Meanwhile, I looked at manual, but couldn't find a quick answer: how can I choose a program for all slots at once? I tried holding enter, but it only set the active slot.
  9. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    deleted post
  10. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    So it's related to the issue I've mentioned of jumping a second. Here's how it goes: Tick# - PCLS TimeDisplayed - GraphTime Logged 1 - 00:00:00 - 00:00:00 2 - 00:00:01 - 00:00:01 3 - 00:00:02 - 00:00:02 4 - 00:00:04 - 00:00:03 As I've mentioned, the time displayed on PCLS JUMPS a second...
  11. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    You do understand, than PCLS shows 10:00:00, which is correct time? And that same second 09:36:00 is being written to file, which is incorrect time. So if the monitor app DOES know correct time, then how is this USB fault?
  12. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    So you are saying you're going to teach all the end users to use USB debug viewer or...? I mean, this is a bug. It's a huge problem. And it's not related to USB in any way, because it's a problem with logging: when time displays 10:00:00 in UI, it writes 09:36:00 in the file. That's the issue...
  13. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    I found the issue, I'll post the analysis soon. edit: ok, here is the problem. First, some things which are NOT wrong: 1) the time passes at correct speed on the device, measured with chronometer. 10 minutes on LCD is exactly 10 minutes on clock 2) time also passes at correct speed on the...
  14. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    I think there is something wrong with monitor app. I took a look at it's time counter, and it seems to skip two seconds each minute. As in, it jumps from :04 to :06 for example. edit: perhaps not, even though it jumps seconds on display, its minute still takes a real minute.
  15. mrQQ

    SkyRC — IFA 2014 — MC3000 charger-analyzer

    Ouch :( I would hate to pay the shipping back to replace it, not to mention the wait time... :(
See more

Latest posts

Top