Recent content by scviper576

fenix-store
  1. S

    Klarus XT21X not working

    It was the factory battery after cutting the klarus wrapper off I seen is was a Samsung INR21700-50E. I put the only battery I have in the light a 18650 LG hg2 and put a perfect size of aluminum foil take up the space and it works fine and even charges the battery. I know my tester is not faulty...
  2. S

    Klarus XT21X not working

    We left the light on overnight on level 2 it had a full battery but when I woke up 5 hours later the light was off so and wouldn't turn on. When I plugged it in the light was flashing yellow that means it needs an inspection according to the manual. Does anyone know how to fix this problem...
  3. S

    Searching for 21700 and 26650 batteries must purchase in the Philippines only.

    I need to find a 21700 protected cell with 5000mah and more than 15a I also need a 26650 that has minimum 5000mah and minimum of 30a. I have tried to find them especially the 26650 min is starting to lose mah and the skin is bubbling. It's just hard to find legit batteries here in the...
  4. S

    How can i mod my streamlight protac hl

    I don't want to buy another streamlight I don't like them and they dont sell them here if I did that's why I want to try to mod this 1. I have 3 other flashlights my edc is 1300 lumens my old edc is 1560 lumens but was a little heavy for a 700 meter thrower
  5. S

    How can i mod my streamlight protac hl

    Is there a way to mod my streamlight protac hl to get more lumens out of it? I won't care what happens to it too much because I have 3 other flashlights with more lumens. There must be a way to increase the output of this light to atleast 2000 lumen so it doesn't do any internal damage.
  6. S

    Manker U21: Pocket thrower, XHP35 HI, 1300 lumens, 26650/18650; (beam)shots, compare

    There is a new Ui in the U21 now I just got the specs from Manker Moonlight: 1-5lm, Low: 58lm, middle: 200lm, high: 500lm, Turbo:1560lm Manker U21 New Ui it has engineering mode to adjust the moonlight and turbo is moved to the double click so that side is turbo, strobe, SOS, beakon and battery...
  7. S

    Manker U21 (XHP35 HI, 26650/18650, 2A charger) Review: RUNTIMES, BEAMSHOTS, more!

    I own this flashlight and now it has a new Ui in it with adjustable moonlight and the turbo is now on the double click also has a new battery indicator and an electronic switch lockout function.
  8. S

    Test/review of Golisi IMR26650 4300mAh (Gold)

    I emptied my battery and used my Xtar charger and it showed almost 4900mah in it when it was done it took around 12 hours to charge it. So from now on I use my flashlight to charge it. Big difference using 2 amp instead of .5 amp. Overall I am very happy with the quality of the battery.
  9. S

    Had a good 700m thrower but now it's a flood

    Actual work time 4 hours
  10. S

    Had a good 700m thrower but now it's a flood

    This is what I had 2 days ago this is tonight after more sanding with 1000 grit sandpaper and polishing it this is what the reflector looks like now
  11. S

    Had a good 700m thrower but now it's a flood

    This is after using 1000 grit wet/dry sandpaper in water. Tomorrow I will get 2000 and use that.
  12. S

    Had a good 700m thrower but now it's a flood

    I think if I use automotive wet/dry sandpaper and sand it in a bucket of water using 1000 and 2000 grit I can get it smooth. Then use a car polish to make it shine more.
  13. S

    Had a good 700m thrower but now it's a flood

    Thanks because finding a minus aspheric lens is not going to be easy in the Philippines because the way this light is shaped a plus won't fit. I can just see it cracking when I snug it together and there goes the Waterproof with a plus.
  14. S

    Had a good 700m thrower but now it's a flood

    What do you suggest I use to polish it to a mirror finish? I used 360 sandpaper and waxed it after
  15. S

    Had a good 700m thrower but now it's a flood

    I went to clean the reflector in my light not knowing that the silver coating would come off and leave a yellow coating so I sanded down the reflector and now it has a flood beam. Does anyone know how I can make it a thrower again without buying a new reflector? what I did to the reflector and...
See more

Latest posts

Top