Hello, can someone post a qualitive runtime chart of the Wedge XT to see if high gets the output constant?
If high isn't regulated - how performs it if the high was used 10min and reactivated:
a) direct after the 10min of usage
b) after cool down of the light?
Runtime graph can be made easy...
I found in a Review of the TA20 that is has no low voltage protection, so it will drain unprotected batteries - like the ones from the Acebeam TK16 Osram - to death.
Summary: you can use the imr16340 from the TK16 and also gets some more outout, but don't leave the battery unused in it for a...
In a review from the TK16 I found that the end voltage of the AB battery reaches 2,6V and because the TA20 stops working with voltage 2,62V it should be ok to use the AB batteries in the TA20.
Thanks for nothing.
I started a lil research:
Imax: TK16 ~ 4,5A | TA20 = ???
LVP: TK16 = 2,73V | TA20 = 2,63V
I found the keeppower RCR123AR (KP) and compared it against TK16 (AB) and TA20 (NT) battery:
Imax: KP = 5A | AB = 5A | NT = 5...6,3A
Umin: KP = 2,5V | AB = 2,75V | NT = ? (<2,63V)
Heights >> 33,7mm ...
.. if not, what will not work?
Acebeam normal turbo mode with Nextorch TA20 16340?
Acebeam Eco Mode turbo with Nextorch TA20 16340?
Nextorch TA20 High Mode with Acebeam TK16 16340 until LVP kicks in? Have Nextorch TA20 a LVP?
Hello,
can I use
Efest IMR 16340 V2 700mAh 3,7V (Pluspol high) Li-Ionen
Or
Efest IMR16340 V1 - 700mAh 3,7V (Pluspol low) Li-Ion-Akku
In the TK16 in Turbo mode?
Hello,
can someone post a comparison of the the Osram Versions of TK16, TK17 and TK18 with beamshots (same location) with different distances?
Really cool would be runtime graphs with Turbo (5min on, 5min off, 5min on, 5min off, 5min on) and some light measuring for different distances.
I...