• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired (Closed) BitZ Pocket CR123A Flashlight

Status
Not open for further replies.

HgRyu

Enlightened
Joined
Dec 1, 2003
Messages
297
Location
Seoul, Korea
This thread is closed.

Dealer lighthound and BugoutGearUSA.com have some stocks.
Please order BitZ from one of them if your location is North America.



BitZ Pocket flashlight..





Specification
  • Material : 6061 Aluminum Alloy (Head, Body), Titanium (Bezel, Clip),
  • Finish : Type III Hardcoat Anodized Natural Finish
  • Lens : Sapphire Crystal Glass, optical grade (Anti-Reflective coating for one side)
  • LED : SSC P4 bin - USXOH
  • Driver : Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
  • Reflector : High quality Orange Peel aluminium reflector
  • O-ring sealed Twist On-Off (no battery rattle)
  • Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
  • Dimension: Diameter 20.3mm, Overall Length 72mm
  • Hole for DIY Tritium vial or Glow-Powder on tail (hole size for 1.5mm X 6.5mm). Sorry, No Tritium for international shipment.
  • Accessories : Titanium Pocket Clip, 2 Split Rings (one stainless steel, one brass)
  • No commercial packing


Driver and Brightness levels, Hidden Signals
  • BitZ Pocket use Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, LED will not be damaged by unregulated high current from Li-Ion battery. Off course, birightness by regular 3V CR123A and 3.6V rechargeable Li-Ion battery will be same.
  • Input voltage range : 1.8V ~ 5.5V
  • There are basic 3 Brightness levels (Medium-Low-High) and hidden 4 Signals (Strobe-Locater-Extreme Low-S.O.S.)
  • Brightness (estimated) : High (120~130lumen), Medium (30~40lumen), low (10lumen)
  • Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
  • Rumtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
  • Runtime for Signal mode (RCR123A, CR123A) : Strobe (8, 12 hours), Locater (24, 36 hours), Ext.Low (45, 70 hours), S.O.S. (8, 12 hours)
  • Basic 3 brightness levels has Memory Function. You will get next level by Off and On within two seconds.
  • You will get into Signals by consecutive 8 On and Off. No memory function for Signal.
  • Locater signal : useful mode for tracking and camping as "follow me" signal or location signal.
  • Extreme Low : This mode is useful as a overnight candle at tent. Current to LED is 10mA.

Caution
  • We recommend you to use AW's protected Li-Ion battery (R123A) if you want to use rechargeable battery. We don't recommend other Li-Ion battery.
  • Do not open bezel, otherwise you will lose guarantee. You will also lose sealing and can't find anti-reflective coated side of lens if you open bezel.
  • Do not use pocket clip for belt. Pocket clip don't have enough strength(tention) and room for thick leather belt, use clip just for thin fabric pocket. Use T6 Torx wrench to remove clip from body.

Price and terms,
  1. Price is U$135/pc
  2. Shipping via airmail to everywhere at U$5.
    I'll ship via registered airmail if your post office have tracking service. (not available to USA, USPS don't have airmail tracking)
    If you want shipment via EMS(tracking), actual shipping will be applied (FYR, cost will be U$22 to US, U$20 to Europe, U$15 to Japan and China)
  3. Payment to [email protected] via Paypal only.
  4. Please add your "CPF ID" on your Paypal details.
    Please mark "registered airmail" if your post office have tracking service.
Some pictures and details,







topimage.jpg

main_image.JPG



Runtime Graph,
rungraphwk3.gif


Color reference,
anochemwv7.jpg


Here are more photos...



Thanks.
 
Last edited:

HgRyu

Enlightened
Joined
Dec 1, 2003
Messages
297
Location
Seoul, Korea
Re: BitZ Pocket CR123A Flashlight

HoopleHead - shipped on Apr-23.
starfiretoo - shipped on Apr-22.
MSaxatilus - shipped on Apr-22.
Cowley - - shipped on Apr-22. (EMS tracking# EM868445282KR )
gswitter - shipped on Apr-22.
KenAnderson - shipped on Apr-22.
ambientmind - shipped on Apr-22.
litetube - shipped on Apr-23.
white light - shipped on Apr-23.
Tessaiga - shipped on Apr-23. (registerd#RR026961748KR)
[email protected] - shipped on Apr-23.(register# RR026961717KR)
Uriah - shipped on Apr-23.
Pumaman - shipped on Apr-28.
derfyled - shipped on Apr-28 (registered#RR026961703KR)
Ozniot (Paul?) - shipped on Apr-29.
white light - shipped on May-06.
jdriller - shipped on May-06.
xcel730 - shipped on May-06.
gottelf - shipped on May-06.
1M1 - shipped on May-19.
mspeterson - shipped on May-19.
crocodilo - shipped on May-19. (registered#RR026961677KR)
nekomane - shipped on May-19. (registered#RR026961663KR)
chandelier - shipped on June-02. (registered# RR026961632KR)
gollum - shipped on May-30. (registered#RR026961646KR)
ewchiu3 - shipped on June 05. (registered#RR026961629KR)

EMS / registered airmail tracking here
 
Last edited:

easilyled

Flashaholic
Joined
Jun 25, 2004
Messages
7,252
Location
Middlesex, UK
Re: BitZ Pocket CR123A Flashlight

Looks well thought-out with all the features that anyone would
want/need for an EDC.
 

datiLED

Flashlight Enthusiast
Joined
May 9, 2006
Messages
2,022
Location
Atlanta, GA
Re: BitZ Pocket CR123A Flashlight

What capacity were the batteries that you used? I'd like to get an idea of the curcuit efficiency. Thanks!
 

Edwood

Enlightened
Joined
Aug 27, 2006
Messages
994
Location
SoCal
Re: BitZ Pocket CR123A Flashlight

Does the high level still work all the way down to 1.8V?

Do any other levels work below 1.8V?
 

scottaw

Enlightened
Joined
Apr 18, 2007
Messages
921
Location
State College, PA
Re: BitZ Pocket CR123A Flashlight

Very nice looking light, too bad I pulled the trigger on a new toy yesterday. That you for listening to what people want.
 

litetube

Enlightened
Joined
Jan 25, 2008
Messages
643
Location
New England
Re: BitZ Pocket CR123A Flashlight

Hi HGRYU.

I have a cpl questions.

Is the Bezel loctite sealed? I see that opening this componenet voids any warranty but if the user wants to change out a scratched window or relube the oring at the window what would they do? Maintaining the correct window orientation shouldnt be a huge issue, I would use a small piece of static cling like that used on sunglasses and just peel it off when the window is remounted.

also is this loosen to turn the light on or loosen to turn off?

Thanx for any info on a great looking light I am considering purchasing!!
 

ambientmind

Enlightened
Joined
May 8, 2007
Messages
465
Re: BitZ Pocket CR123A Flashlight

wow! i really want one of these! waiting for payday now...
 

darkzero

Flashaholic* ,
Joined
Oct 7, 2003
Messages
4,459
Location
SoCal
Re: BitZ Pocket CR123A Flashlight

Hi HGRYU.

I have a cpl questions.

Is the Bezel loctite sealed? I see that opening this componenet voids any warranty but if the user wants to change out a scratched window or relube the oring at the window what would they do? Maintaining the correct window orientation shouldnt be a huge issue, I would use a small piece of static cling like that used on sunglasses and just peel it off when the window is remounted.

also is this loosen to turn the light on or loosen to turn off?

Thanx for any info on a great looking light I am considering purchasing!!

:popcorn:
 
Last edited:

Unforgiven

Flashlight Enthusiast
Joined
May 26, 2002
Messages
3,256
Location
Missouri, U.S.A.
Re: BitZ Pocket CR123A Flashlight

I received one a few days ago and still impressed with it. It has been with me since I opened the box.

ROK did a review on it here. I posted some of my own comments on the light in that thread too.

The build quality is outstanding. :thumbsup:
 

MSaxatilus

Flashlight Enthusiast
Joined
Sep 24, 2002
Messages
2,641
Location
New Jersey
Re: BitZ Pocket CR123A Flashlight

No need to reply to my PM.... I answered my own question.

Order placed! :paypal:

Looks like a really nice little light. Can't wait to see it in person.

MSax
 
Status
Not open for further replies.
Top