5 layer brass and bronze 93mm SAK

bushidomosquito

Newly Enlightened
Joined
Sep 16, 2010
Messages
38
This one was a challenge. The scissors, pliers and Phillips drivers are adapted from 91mm SAKs. After some careful backspring reshaping and spacing the bottle opener out to the same thickness as the Phillips driver they snap like they were made for this size. The scales and scissor rest are hard brass and the liners are spring tempered phosphor bronze. Screws and pivot pins are 1/8" hardened stainless steel. Probably the only 5 layer 93mm SAK made.

http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer7.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer6.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer5.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer4.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer3.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer2.jpg
http://i289.photobucket.com/albums/ll227/bushidomosquito/5 layer/5layer1.jpg


Your images are too large and have been replaced with links. Please resize and repost.
See Rule #3 If you post an image in your post, please downsize the image to no larger than 800 x 800 pixels. - Thanks Norm
 
Last edited by a moderator:

Morrjac

Newly Enlightened
Joined
Jun 20, 2012
Messages
1
This is absolutely gorgeous! :eek:WOW!! How can I get something like this?
 

Latest posts

Top