Nichia 219 Triple.

extremescramble

Newly Enlightened
Joined
May 9, 2013
Messages
41
Location
United Kingdom
Hi everyone.
I am replacing the Cree triple star in my Tri EDC with a Nichia 219. Anything I should know before I proceed ? From what I have read I can reasonably expect to damage the existing triple star when removing it from the pill due to the adhesive but this isn't a concern. For information I am combining the Nichia 219 triple with a Nanjg 105c (2.8A)
Any advice on this mod would be appreciated .
Philip.
 

DellSuperman

Flashlight Enthusiast
Joined
Dec 5, 2012
Messages
1,760
Location
Singapore
Hi everyone.
I am replacing the Cree triple star in my Tri EDC with a Nichia 219. Anything I should know before I proceed ? From what I have read I can reasonably expect to damage the existing triple star when removing it from the pill due to the adhesive but this isn't a concern. For information I am combining the Nichia 219 triple with a Nanjg 105c (2.8A)
Any advice on this mod would be appreciated .
Philip.

You will need to configure ur new triple star as a parallel so that each of the emitter will get 2.8A..
Freezing your flashlight before attempting to remove the star will help because it makes the adhesive brittle & it should come off easier.
Thats all i can think of.
Good luck!

-JonK
 
Top