• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Withdrawn: Sinner 18350 Tri-EDC

Status
Not open for further replies.

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
I ordered this from Sinner a while ago and just got it, but I have my eyes set on another light, so this one goes.

I ordered neutral XP-G2's but this one is cool white.
- 4 modes and always starts on low
- titanium pocket clip option CORRECTION It's a stainless clip (can switch to McGizmo clip if you have one)
- comes with AW 18350 IMR battery
It is brand new but there's some marks on the titanium body, it's very minor and can be polished out.

$200USD shipped, PayPal only







 
Last edited:

RUSH FAN

Flashlight Enthusiast
Joined
Nov 22, 2013
Messages
1,172
Location
USA
Re: FS: Sinner 18350 Tri-EDC

Very nice light!
Good luck with your sale!
 

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: FS: Sinner 18350 Tri-EDC

PM replied

Just checked the light with a magnet, I was given the stainless clip instead of the titanium clip:shakehead
 

Nicrod

Flashaholic
Joined
Mar 27, 2011
Messages
6,011
Location
So Cal
Re: FS: Sinner 18350 Tri-EDC

Does that clip have the same hole spacing as McG clips?

My Ti sinner 'clip' holes WONT accept a McGizmo clip. :(

Also, how are your threads?
 
Last edited:

Toolboxkid

Enlightened
Joined
Aug 31, 2014
Messages
209
Re: FS: Sinner 18350 Tri-EDC

If it was neutral white or warm I'd prob have to snag it. Not a cool white fan though.


Sent from my iPhone using Candlepowerforums
 

Obijuan Kenobe

Flashlight Enthusiast
Joined
Sep 19, 2010
Messages
1,059
Location
Pittsburgh, PA, USA, Earth
Re: FS: Sinner 18350 Tri-EDC

I have been on the look out for Ti clips other than McGizmo clips. There are none. I have looked for a while now.

I have been disappointed to find more than one of my lights has a clip I thought was Ti, but is not.

You can widen the holes of a McGizmo clip easy enough. These about 4mm wider, or about 2mm per side. That's easy. I did that for my Luter angle light, and it now has a real Ti McGizmo clip...as any Ti light should have.

Stupid price for a Ti light, regardless of tint or thread quality.

obi
 

easilyled

Flashaholic
Joined
Jun 25, 2004
Messages
7,252
Location
Middlesex, UK
Re: FS: Sinner 18350 Tri-EDC

This is a great price ... having just received a very similar light myself from sinner, I am quite impressed with the design, compactness and usefulness of the levels on mine.
 

RUSH FAN

Flashlight Enthusiast
Joined
Nov 22, 2013
Messages
1,172
Location
USA
Re: FS: Sinner 18350 Tri-EDC

Hi KuanR -

I am humbly releasing myself from the offer.
Please kindly make offers to other interested parties.
Thanks for your understanding.

Thanks,
Rush
 

KuanR

Flashlight Enthusiast
Joined
Jan 20, 2012
Messages
1,823
Location
Macau S.A.R.
Re: FS: Sinner 18350 Tri-EDC

Does that clip have the same hole spacing as McG clips?

My Ti sinner 'clip' holes WONT accept a McGizmo clip. :(

Also, how are your threads?

The McG clip does fit on, but the clip holes peak out through the side of the screws. The threads are on the gritty side, but after cleaning it and putting on some TiTi Twister lube it's a lot better. Definitely not McGizmo or Mac like threads.

If it was neutral white or warm I'd prob have to snag it. Not a cool white fan though.

Sent from my iPhone using Candlepowerforums

Me neither...That's why this is going up for sale and I'm looking at another light to replace it. Though I am still debating on having this rebuilt and modded further.

This is a great price ... having just received a very similar light myself from sinner, I am quite impressed with the design, compactness and usefulness of the levels on mine.

For what you pay for it, it's a great light and the little quarks can be worked out.

Hi KuanR -

I am humbly releasing myself from the offer.
Please kindly make offers to other interested parties.
Thanks for your understanding.

Thanks,
Rush

No worries Rush, I totally understand :)
 

Nicrod

Flashaholic
Joined
Mar 27, 2011
Messages
6,011
Location
So Cal
Re: FS: Sinner 18350 Tri-EDC

Thanks for the response KuanR appreciate it.

A set of neutral XPG2's would make this light right!
 
Status
Not open for further replies.
Top