hbk_rey
Enlightened
- Joined
- Nov 2, 2014
- Messages
- 503
A few Hosts available.
Sorry for the earlier improper post. And I hope this new one will not mislead any member. Thanks.
I made several custom lights for the other forum, now introducing the Ti Host.
Host Only. You Must have:
Lens,emitter,driver, reflector, battery and Ability of assembling. (2 kind of copper pills,O-rings and switch included.)
Here is what I did with the host. You can also try triple xp-g2 or others.
#1: Triple nichia 219B in parallel + Carclo 10507 optic + 4.5A driver.
#2: XM-L2 or XPL + aluminium reflector +20mm glass lens + 8*7135 driver.
#3: 3535 UV LED + aluminium reflector +20mm glass lens + 3*7135 driver.
etc.
Size:25*82mm.
Battery:18350/18650 (with extension) (16340/CR123)
Tritium:9 slots in head, 1 in button. (6*1.5mm)
Ti Clip (In processing): 46 mm length. M2.5 Screw, 7mm holes distance from center to center. Fits for Nitecore D10/D11 and more.
DIY NOTE:
1. 20mm lens.
2. 17mm driver.
3. Reflector less than 11.5mm height.
Sorry for the earlier improper post. And I hope this new one will not mislead any member. Thanks.
I made several custom lights for the other forum, now introducing the Ti Host.
Host Only. You Must have:
Lens,emitter,driver, reflector, battery and Ability of assembling. (2 kind of copper pills,O-rings and switch included.)
Here is what I did with the host. You can also try triple xp-g2 or others.
#1: Triple nichia 219B in parallel + Carclo 10507 optic + 4.5A driver.
#2: XM-L2 or XPL + aluminium reflector +20mm glass lens + 8*7135 driver.
#3: 3535 UV LED + aluminium reflector +20mm glass lens + 3*7135 driver.
etc.
Size:25*82mm.
Battery:18350/18650 (with extension) (16340/CR123)
Tritium:9 slots in head, 1 in button. (6*1.5mm)
Ti Clip (In processing): 46 mm length. M2.5 Screw, 7mm holes distance from center to center. Fits for Nitecore D10/D11 and more.
DIY NOTE:
1. 20mm lens.
2. 17mm driver.
3. Reflector less than 11.5mm height.
Last edited: