• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

2xAA Tool Light : New Vantage-nCr

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
The New Vantage-nCr will be ready to ship by 15-July-2016

More info. will be post to this thread.



Vantage-nCr.jpg


Best regards,

Ricky - Lumapower
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Runtime graph compare to prev. version of Vantage VT-01G
Vantage nCr : 800mA driver with XM-L2 U3
Vantage VT-01G : 680mA driver with XP-G R5


Both flashlights power ON at max. output and use the same pair of battery at full charged.

Battery : Sanyo 2000mAh NiMH
Note : (my batteries already serviced me for more than 5 years and the actual capacity may be less than 2000mAh)

Vantage-nCr-runtime.jpg


Due to the new circuit design on Vantage nCr, the overall performance increased by 70%

Beamshots compare to prev. version of Vantage VT-01G

Vantage nCr : 800mA driver with XM-L2 U3
Vantage VT-01G : 680mA driver with XP-G R5

Both flashlights power ON at max. output and at 1 meter apart from the wall.

1m_nCr_01.JPG


1m_nCr_02.JPG


1m_nCr_03.JPG


Best regards,

Ricky - Lumapower
 

Lucky Duck

Enlightened
Joined
May 22, 2010
Messages
265
Been looking for more info on the Lumapower site, this one (Vantage-nCr) seems not to exist.
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Sorry for late update, we are now wirking on the website and details will be launch within this week.
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Due to network issues, we cannot upload the new models to our online store, will do it as soon as the problem fixed.
 

Outdoorsman35

Newly Enlightened
Joined
Aug 11, 2016
Messages
7
Looks good, not sure if I will purchase due to lack of proper ipx rating. However it still looks like a great light !
 

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
The Vantage series is water resistance :
Test conditions : with all o-rings well lubed, under 1M water for at least 30 minutes. It works without any problems. IP68
 
Last edited:

lumapower

Newly Enlightened
Joined
Sep 12, 2006
Messages
143
Location
Hong Kong
Command mode refers Pulse command to control the instant output, and this instant ourput not only momentary on but also as Normal mode.when a full press to the switch. After power off, the output of the command mode won't be store to.the memory.
 
Top