Vinz
Newly Enlightened
Hi, folks!
I would like to offer some of my Mjölnir searchlights. I did a small batch for the public and four of them are available.
The Mjölnir-Project already started two years ago, and since then, they have been continuously further developed and improved.
Facts:
Searchlight with aspherical two-lens set-up and no wasted light, due to an anti-reflection coated pre-collimater, directly mounted onto the LED with a viewing angle, that perfectly matches the diameter of the big aspherical lens in the front. The Result: A huge ~ 1600lm Spot with at least 600.000 cd.
Details:
The price is $360, including insured DHL shipping and PayPal-fees.
Please note, the following pictures are showing an earlier production model with a slightly different bezel. The new ones (click here) are 3mm longer for an improved lens protection and gunmetal HAIII anodized, for a higher durability.
Here you can see, the light doesn't hits the inside of the head. There is also no adjusting. The Lens sits onto the LED/MCPCB and was designed to fit the diameter and focal point of the Lens in the front.
616 Meters to the house. Still with a diamond-treated dedomed XM-L2. The new and now equipped XP-L HI V3 is even brighter.
I would like to offer some of my Mjölnir searchlights. I did a small batch for the public and four of them are available.
The Mjölnir-Project already started two years ago, and since then, they have been continuously further developed and improved.
Facts:
Searchlight with aspherical two-lens set-up and no wasted light, due to an anti-reflection coated pre-collimater, directly mounted onto the LED with a viewing angle, that perfectly matches the diameter of the big aspherical lens in the front. The Result: A huge ~ 1600lm Spot with at least 600.000 cd.
Details:
- 6 brightness modes + strobe, selectable via magnetic control ring
- Copper mounted Cree XP-L HI in the highest available V3 brightness-binning, driven at 6.8A
- Custom made thermal grease & adhesive, based on 85% of monocrystalline synthetic diamond with a thermal conductivity of 33 W/(cm·K). For example, aluminum is at 2.2 and copper at around 4 W/(cm·K).
- Custom made Pre-collimator lenses with AR-Coating on both sides.
- Hand made heatsinks in a super solid design.
- Stays cool even under harsh condition, thanks to a huge cooling surface (many big fins).
- Waterproof (IPX8-rated)
- powered by 3x 18650 (protected ones recommended).
- 770g without batteries
- Comes in a high quality bomb proof case with a single-point weapon sling, spare o-rings and rubber boot.
The price is $360, including insured DHL shipping and PayPal-fees.
Please note, the following pictures are showing an earlier production model with a slightly different bezel. The new ones (click here) are 3mm longer for an improved lens protection and gunmetal HAIII anodized, for a higher durability.
Here you can see, the light doesn't hits the inside of the head. There is also no adjusting. The Lens sits onto the LED/MCPCB and was designed to fit the diameter and focal point of the Lens in the front.
616 Meters to the house. Still with a diamond-treated dedomed XM-L2. The new and now equipped XP-L HI V3 is even brighter.