- Joined
- Feb 7, 2014
- Messages
- 746
The day has come, to have the last versions on the Nucleus up for sale. I have adjusted the quantity of each version available, as part of this batch will be sold through Flashlight Fanatics. This version is the last pieces of Nucleus that I have made, next year I will start working on a new design. Part of the reason for ending the Nucleus run is, that I will try to keep it as unique as it can be with the limited number of pieces made, the other one is assembly being very strenuous on my eyes. The same warranty goes for as all other Nucleus. I haven't had any issues at all so far, and I've been keeping the same quality control as previous pieces, but in any case you have an issue, I will ship the light back to me, repair or replace part with the issue, and send it back to you. You'd also have the chance, to receive a full return.
If you're not familiar with this flashlight, you can read the original build thread HERE
Pricing:
Please note, that all Mokume Gane and Moku-ti sold will include a custom Titanium battery holder being able to hold 1 set of batteries for the Nucleus. Please refer the pictures to see what they look. I can add tritium vials in these as well for an additional cost described in add-ons.)
Discount for existing Nucleus owners: All previous Nucleus owners will receive 10%off of the sale price of one light. If you're purchasing more than one light, you'll need one light for each 10% discount.
Add-ons:
Shipping cost: $15 flat rate for USPS Priority Mail. All packages will be shipped on 12/19/16 Monday, so it will arrive before Christmas.
The number of pieces being sold will be:
Few things I'd like to add:
Payment:
Please send PayPal payments to: [email protected]
- Size: 1.04" x 3/8" (0.37") or 26.4mm x 9.44mm (if you're on the metric system) / With the split ring holder accessory 1.15" or 29.4mm
- Weight: 0.17 oz or 5 Grams
- LED: Nichia NVSL219BT-V1 4000K, 93 CRI, D200 Bin
LED Features
- Window : 7.5mm Sapphire window, with AR coating on both sides, specifically tuned to the wavelenght of this LED
- Lumens: ~ 20-25 ( This is an estimate based on the current to LED, which is approximately 72mA max. on fresh batteries.
- Runtime: It is made for using in short intervals of 10-15 secs. it will have enough juice for about 100-150 of this 10-15 sec. burst. If ran continuously , it will run for about 45 mins. losing brightness until the 10 minute mark. then running it on about 2 lumens for the rest of its run-time)
(If you're getting this light, to look for lost treasures in the sand, it is Not the right light for you. On the other hand, if you're an enthusiast wanting to own a really cool piece that might not be replicated and you're ok, for using it for short intervals, or emergencys, you'll love this light. I have designed other hosts for this that is using 5A rechargeable cylindrical batteries, capable of providing about 800-900 mA current to the LED. They might be available in the future, as an add-on, if I can work out all the issues)
Country of design and manufacture: If you're feeling patriotic, you'll love to hear, that it was all designed and made here in San Diego, California.
Manufacturing: With the exception of writing the CNC programs, I designed, assembled and even operated some of the CNC lathes and mills. (Haas SL-10 lathe and Haas VF-3SS mill)
(Machining on these pieces are to very tight tolerances, and are high quality, with smooth threads. This light is a mechanical gem! The light can be fully disassembled with the exception of the brass pill.
Water Resistance:.10ft./3meters (I will take this down up to 100' in the next few weeks and update the exact limitations. Waterproofing will work, as long as you don't back out the rear cap more, than you need to, to turn off the light.)
Here they are, let me know what you think, also, if you have any questions:
You can visit my Flickr for the high resolution images HERE:
The Full Exotic Collection
Mokuti Front (Version 1)
Mokuti Rear (Version 1)
Mokuti Rear (Version 2)
Comperison of the 2 versions on Mokuti
Comparison of freshly machined Mokume Gane and few months old patina
Damascus Steel Version
Copper and Beryllium Copper Versions (Machine finish)
Beryllium Copper Version rear (Tritium installed)
Copper and Damascus Steel version standing on a US Penny.
Full Collection
Full Collection (Tail Caps)
Titanium Battery Case (Rear)
Titanium Battery Case (Front without split ring holder attached)
Carrying on a necklace
Nucleus Exploded View
If you're not familiar with this flashlight, you can read the original build thread HERE
Pricing:
- Copper $135 (It comes in machine finish or mirror polished version) Update 12/16/2016 3 pcs. available
- Beryllium Copper $150 (It comes in machine finish) Sold Out
- Damascus Steel $225 (This one is lightly etched, with the high points polished) Sold Out
- Mokume Gane $375 (No etching on this one, please refer to pictures to see patina after few months) Update 12/16/2016 2 pcs. available
- Moku-ti (Timascus) $475 (Mirror polished, and heat treated to bring out colors. Comes in 2 version, I will do the finish you specify. Please refer to pictures to see the difference) Sold Out
Please note, that all Mokume Gane and Moku-ti sold will include a custom Titanium battery holder being able to hold 1 set of batteries for the Nucleus. Please refer the pictures to see what they look. I can add tritium vials in these as well for an additional cost described in add-ons.)
Discount for existing Nucleus owners: All previous Nucleus owners will receive 10%off of the sale price of one light. If you're purchasing more than one light, you'll need one light for each 10% discount.
Add-ons:
- Tritium vials : $25 (No installation cost just the cost of the vials) 5x 1mm x 3mm
- Mirror polish : $15 (Copper only)
- Tritium vials for battery case: $25 (Same cap is being used in one end as the Nucleus) 5x 1mm x 3mm
Shipping cost: $15 flat rate for USPS Priority Mail. All packages will be shipped on 12/19/16 Monday, so it will arrive before Christmas.
The number of pieces being sold will be:
- Copper : 8 pcs. (20 made total)
- Beryllium Copper : 3 pcs. ( 7 made total)
- Damascus Steel : 6 pcs. (11 made total)
- Mokume Gane : 6 pcs. (15 made total)
- Moku-ti (Timascus) : 3 pcs. ( 7 made total)
Few things I'd like to add:
- The battery case will not be sold separately, they will only come with Mokuti and Mokumi Gane lights. If you prefer to have tritium vials installed in these, I will ask you for the cost of the vials only ($25) I will try to ship them together with the lights, but they might only ship after Christmas. If you absolutely has to have it at the same time as the light, please message me! The last 2 photos show the battery case, which I can provide in a full polished Ti or brushed Ti version.
- Copper version will be available with machine finish (exceptional low sheen finish) and mirror polished version)
- Beryllium copper will be offered in machine finish only)
- Moku-ti and Timascus is nearly identical, being made by different companies (Timascus is made by Alpha Knife Supply, Moku-ti is made by Chad Nichols) The version I've made version can be done in 2 different variations (depending on the length of heat treating) you'll have the choice to pick the one you like the most.
- I have tritium vials for all the flashlights, so shipping will not be delayed.
- Damascus steel being used was made by Matthew D. Walker who is a true artist when it comes to creating Damascus steel.
- All versions will come with a Ti split ring holder and 5mm split ring installed in the tail-cap, so you can carry it on a key-chain, or around the neck as jewelry.This goes for the custom battery case, that comes included with all Mokume Gane and Mokuti flashlights.
- As all other Nucleus lights, it is proudly made in USA (San Diego, California)
Payment:
Please send PayPal payments to: [email protected]
- Size: 1.04" x 3/8" (0.37") or 26.4mm x 9.44mm (if you're on the metric system) / With the split ring holder accessory 1.15" or 29.4mm
- Weight: 0.17 oz or 5 Grams
- LED: Nichia NVSL219BT-V1 4000K, 93 CRI, D200 Bin
LED Features
- Thermal resistance: 6C/W
- Max Forward Current: 1.5A
- Max Junction Temperature: 150C
- Color Rendering: Ra 92
- Electrically neutral thermal path
- SW40 Tint
- D200 Flux Bin(200-220lm@700mA)
- L2 Voltage Bin (2.9-3.1V@700mA)
- Window : 7.5mm Sapphire window, with AR coating on both sides, specifically tuned to the wavelenght of this LED
- Lumens: ~ 20-25 ( This is an estimate based on the current to LED, which is approximately 72mA max. on fresh batteries.
- Runtime: It is made for using in short intervals of 10-15 secs. it will have enough juice for about 100-150 of this 10-15 sec. burst. If ran continuously , it will run for about 45 mins. losing brightness until the 10 minute mark. then running it on about 2 lumens for the rest of its run-time)
(If you're getting this light, to look for lost treasures in the sand, it is Not the right light for you. On the other hand, if you're an enthusiast wanting to own a really cool piece that might not be replicated and you're ok, for using it for short intervals, or emergencys, you'll love this light. I have designed other hosts for this that is using 5A rechargeable cylindrical batteries, capable of providing about 800-900 mA current to the LED. They might be available in the future, as an add-on, if I can work out all the issues)
Country of design and manufacture: If you're feeling patriotic, you'll love to hear, that it was all designed and made here in San Diego, California.
Manufacturing: With the exception of writing the CNC programs, I designed, assembled and even operated some of the CNC lathes and mills. (Haas SL-10 lathe and Haas VF-3SS mill)
(Machining on these pieces are to very tight tolerances, and are high quality, with smooth threads. This light is a mechanical gem! The light can be fully disassembled with the exception of the brass pill.
Water Resistance:.10ft./3meters (I will take this down up to 100' in the next few weeks and update the exact limitations. Waterproofing will work, as long as you don't back out the rear cap more, than you need to, to turn off the light.)
Here they are, let me know what you think, also, if you have any questions:
You can visit my Flickr for the high resolution images HERE:
The Full Exotic Collection
Mokuti Front (Version 1)
Mokuti Rear (Version 1)
Mokuti Rear (Version 2)
Comperison of the 2 versions on Mokuti
Comparison of freshly machined Mokume Gane and few months old patina
Damascus Steel Version
Copper and Beryllium Copper Versions (Machine finish)
Beryllium Copper Version rear (Tritium installed)
Copper and Damascus Steel version standing on a US Penny.
Full Collection
Full Collection (Tail Caps)
Titanium Battery Case (Rear)
Titanium Battery Case (Front without split ring holder attached)
Carrying on a necklace
Nucleus Exploded View
Last edited:
I will message you with the total in the morning! Thanks!
