• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Yuji high cri 5mm LEDS group buy

ma tumba

Flashlight Enthusiast
Joined
Oct 7, 2013
Messages
1,344
Location
Russia
I am going to buy a hundred of Yuji 3200K 45 deg high cri 5mm LEDs. http://store.yujiintl.com/collections/frontpage/products/bc-series-5mm?variant=962057553

I know that some other members would buy some of those if shipping cost was more reasonable. I will be able to resell most of those LEDs at my actual cost which would be $0.3 per LED + about $3 per shipment. For example, getting 10 LEDs from me would cost 10*$0.3 + $3 = $6.

The main purpose of this post is to find out if there is a sufficient demand in LEDs with other specs so I could order them as well just for the benefit of the other members.

3200K x 45deg
pc_light 10
gunga 20
nfetterly 20
archimedes 5
egginator1 10
flat-ray 10
yummybacon 10
ma tumba 45
light-modder 10
mattw 10
studfreeman 10
zumac99 20
scout24 5
phosphor22 15
total = 200/200


3200x60
staticx 10
archimedes 5
egginator1 10
yummybacon 10
ma tumba 25
light-modder 5
koala 3
studfreeman 10
Ozythemandias 5
scout24 5
gt390 6
MakQueen 6
total = 95/100


5600x45
staticx 10
egginator1 10
yummybacon 10
ma tumba 27
light-modder 5
mattw 10
studfreeman 10
Ozythemandias 5
scout24 5
phosphor22 5
MakQueen 3
total = 100/100
 
Last edited:

staticx57

Flashlight Enthusiast
Joined
Dec 2, 2011
Messages
1,749
Location
NJ
Would be willing for 10 of each color temp. I am indifferent to the beam angle.
 

archimedes

Flashaholic
Joined
Nov 12, 2010
Messages
15,780
Location
CONUS, top left
Yes, I would be interested in 10 of the warm white version (only) ...

EDIT ... either beam angle is fine, but would prefer 5 of each (if you get both) rather than 10 of one :)
 

ma tumba

Flashlight Enthusiast
Joined
Oct 7, 2013
Messages
1,344
Location
Russia
Updated the first post with current subscriptions. please check if I got everyone right
 

pc_light

Enlightened
Joined
Feb 10, 2004
Messages
600
Location
Old Dominion, USA
Would it be possible to put these in a nitecore tube?
Fit wise they're 5mm so yes but current draw-wise, not without a reduction, they'd burn up in no time (if they run at all).

The Tube has a higher current 5mm (running at 100mA). The Yuji's are more conventional w/30mA max.

Their appeal is possible Hi-CRI.
 

StudFreeman

Enlightened
Joined
Sep 20, 2011
Messages
205
Location
Maine
Could we combine shipping for different types of LED?
Either way, please put me down for:
10* 3200k x 45°
10* 3200k x 60°
10* 5600k x 60°
 

Ozythemandias

Flashlight Enthusiast
Joined
Jan 4, 2017
Messages
1,417
Please put me down for 5 of the 3200k (any beam angle) and 5 of the 5600k

Thanks!
 
Top