Hi
I have an AmpMax 3400mAh 18650, it powers my Zebralight SC600 ll.
Both are protected.
The battery died while the torch was on the very low settling (under 10lm), there was no load or heat, no turbo mode, just 2 minutes of low lumen mode.
I put the battery in my Nitecore IntelliCharger i4 and it didnt recognize it.
I checked the battery voltage and it reads 3.24v
I left the battery plugged into the charger overnight to see if it would kick in and start charging... but nope.. nothing.
To attempt to jump start it randomly by putting the battery in the charger the wrong way, knowing the charger has reverse polarity protection, to my amazement it started to show it was charging in the reverse polarity position. (bizarre as the battery is not indicating reverse polarity, 3.24v)
umm help!???
I have an AmpMax 3400mAh 18650, it powers my Zebralight SC600 ll.
Both are protected.
The battery died while the torch was on the very low settling (under 10lm), there was no load or heat, no turbo mode, just 2 minutes of low lumen mode.
I put the battery in my Nitecore IntelliCharger i4 and it didnt recognize it.
I checked the battery voltage and it reads 3.24v
I left the battery plugged into the charger overnight to see if it would kick in and start charging... but nope.. nothing.
To attempt to jump start it randomly by putting the battery in the charger the wrong way, knowing the charger has reverse polarity protection, to my amazement it started to show it was charging in the reverse polarity position. (bizarre as the battery is not indicating reverse polarity, 3.24v)
umm help!???
Last edited: