Sold/Expired Huge Malkoff Sale - all SOLD (or withdrawn)

Closing thread to consolidate.
____________________________________________________________________________________________________________________________________________________________________
SOLD:
1. Hound Dog 18650 turnkey pkg, Neutral 4000K, 900lm momentary/800lm cont/30lm on low; Brand New never used:site price $199/my price $150 shipped SOLD
2. MDC 16650 Neutral, Brand New Never used: site price $140/ my price $115 SOLD
3. MDC HA 1CR123 Neutral 4000K, 3/15/185 lumen modes, 2-3.2v (will work on aa/eneloop w/reduced outputs), Brand new, only tested: site price $106/ my price $85 shipped SOLD
4. MDC HA 1CR123 219B, Brand new, only tested: site price $110/ my price $90 shipped SOLD

6. MDC 123 body, Brand New Never used: site price $40/ my price $30 shipped SOLD
6a. MDC 16650 body, Brand new Never used: site price $50/ my price $40 shipped SOLD
6b. MDC AA body, Brand New Never used: site price $38/ my price $28 shipped SOLD
7. VME heads, QTY of 2 Brand New Never used: site price $32ea/ my price $25ea shipped SOLD
8. MDC Bezel tool, Brand New, used once: site price $20/ my price $10 shipped SOLD
9. MD2 Body & Switch, New, only used for testing: site price $49/ my price $40 shipped: Can be sold as complete MD2 or MD2 w/module. SOLD
10. MD1.5 Body only, Brand new never used, Custom made by Martin D White $50+ shipping/ my price $45 shipped: Can be sold with tailcap and/or head SOLD
11. MD1 Body only, Brand new never used, custom made by Martin D White $50+ shipping/ my price $45 shipped: Can be sold with tailcap and/or head SOLD
12. MDX 16.5 head, Has some minor scrapes: site price $32/ my price $17 Sold: can be sold with H/L ring Pics shown below. marks/scrapes are not quite as bad as the pics make them but it's definitely not flawless.
13. MDX 22.3 Head w/aluminum ring: QTY of 3 Brand new never used: site price $32ea/ my price $25ea shipped SOLD
14. Switches/Tailcaps: QTY of 3 Brand New: site price $27ea/ my price $22ea shipped SOLD
14. Switches/Tailcaps: : QTY of 4 site price $27ea/ my price $12ea shipped SOLD: [The remaining tailcaps have a flaw in the finish (kind of like they were pitted then coated) will post pics and adjust price. When i look closely at the pitting under bright light; it looks like tiny pinholes. Not super noticeable but I call these Blems. unless you look at them close, they still look like new. There are no damage marks, dings, etc. Pics below may not show it well]
15. High/Low rings: QTY 4 Brand New: site price $27ea/ my price $22ea shipped SOLD
16. M61N: Like new, used for testing (very minimal use): site price $45/ my price $35 SOLD
17. M61NL: Like new, used for testing (very minimal use): site price $45/ my price $35 shipped SOLD
18. M61NLL: Like new, used for testing (very minimal use): site price $45/ my price $35 shipped SOLD
20. Oveready Custom knurled tailcap with zerorez: Brand new never used: site price $55/ my price $35 shipped SOLD
20a. Oveready Custom knurled tailcap Brand New not use but screwed onto MD1/1.5 : site price $37 w/o switch +18 zerorez/+22 mcClicky/ my price $22 + $13 zerorez/ +17 mcClicky shipped SOLD
21. Moddoolar Tria Trit tailcap Dark Natural Finish: Brand new never Used: site price $93 w/no switch+18 zerorez/+22 mcClicky/ my price $ 70 +13 zerorez/ +17 mcClicky shipped SOLD

22. Keeppower 16650 2500mah Cells: 1pr, Brand new sealed: site price $14pr/ my price $10pr shipped SOLD(Pic for reference only)

23. Keeppower 18350 900mah cells: 1 pr, Brand new sealed: site price $12/ my price $8pr shipped SOLD (Pic for reference only)

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I will take #18 if it works with surefire. Thanks

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

De-Lux said:

I will take #18 if it works with surefire. Thanks

Click to expand...

Quote from Gene's site: " It was designed specifically for use in Malkoff MD2, Elzetta ZFL-M60, and SureFire 6P, 9P, 6Z, Z2, Z3, C2, C3, M2, G3, and G2 flashlights. It may or may not fit other models. "

PM sent with paypal address.

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

Paypal sent. Looks it will work fine with my 9p. Much appreciated, Thanks

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I'll take both 7's. VME heads.

please PM me for PP info.

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

#18 sold and paid for

#4 & 16 waiting to hear back on

both #7's pending payment

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

euroken said:

I'll take both 7's. VME heads.

please PM me for PP info.

Click to expand...

Sent pm and a second pm for clarification to be safe. waiting to hear back. Thanks

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I will take
#4 MDC HA 1CR123 219B
#16 M61N

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I will take a MDX 22.5 head assuming it fits a MD2 The removal tool as well if it is this. [h=1]MALKOFF MD2 HEAD WRENCH[/h]Looking over the list for more.

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

luckie8 said:

I will take
#4 MDC HA 1CR123 219B
#16 M61N

Click to expand...

Sent you my paypal

Woods Walker said:

I will take a MDX 22.5 head assuming it fits a MD2 The removal tool as well. Looking over the list for more.

Click to expand...

Yes, MDX 22.5 is the same as 16.5 but has the larger whole. You also want the MDC bezel removal tool?


Thanks

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

INFRNL said:

Sent you my paypal


Yes, MDX 22.5 is the same as 16.5 but has the larger whole. You also want the MDC bezel removal tool?


Thanks

Click to expand...

Is it this?

https://malkoff-devices.myshopify.c...aneous-items/products/malkoff-md2-head-wrench

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

Also I will take a hi/lo ring with the MDC 22.3 head. waiting info on the tool.

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

sorry, got crazy there for a minute. replied to your pm.

for those curious since I haven't been able to take pics yet. The MDC bezel tool is not the one woodswalker linked but it is this one: https://malkoff-devices.myshopify.com/collections/parts-and-miscellaneous-items/products/mdc-bezel-too

Woods Walker said:

Also I will take a hi/lo ring with the MDC 22.3 head. waiting info on the tool.

Click to expand...

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I think I have replied to all pm's and posts here. I apologize if I missed anything.

I need to step back and see where i am at and update the OP.

Thanks for all the activity/sales, etc

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

MD1.5 Body only, Brand new never used, Custom made by Martin D White $50+ shipping/ my price $45 shipped: Can be sold with tailcap and/or head

Does that take 1XAA?

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

Woods Walker said:

MD1.5 Body only, Brand new never used, Custom made by Martin D White $50+ shipping/ my price $45 shipped: Can be sold with tailcap and/or head

Does that take 1XAA?

Click to expand...

Yes, MD1.5 is 18500 and can take 14500/AA if you have an adapter or fill the gap. with a zero rez tailcap it can be used with an unprotected 18650

MD1 is for 123 size cells and can take unprotected 18500 if used with zero rez tailcap.


I have 2 zero rez tailcaps i will be listing but haven't figured a price yet.

Did I miss any info?

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

WOW! :mecry: oo: :shrug: :duh2:

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

INFRNL said:

Yes, MD1.5 is 18500 and can take 14500/AA if you have an adapter or fill the gap. with a zero rez tailcap it can be used with an unprotected 18650

MD1 is for 123 size cells and can take unprotected 18500 if used with zero rez tailcap.


I have 2 zero rez tailcaps i will be listing but haven't figured a price yet.

Did I miss any info?

Click to expand...

I will take the MD1 1xcr123 body do you have a standard MD tail cap? I am working together the parts for a M31 CR123 with Hi/Lo ring combo.

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

I need an MD2 without tail-switch if you would like to cut me a deal & remove it to give to Woods Walker?

Re: WTS (US): **Malkoff Party**Complete/Build your Own/Parts**

Grab it guys! This is a Malkoff mega sale from a *super* cool guy... highly recommended.!