A TOUGH 1xAA flashlight with tail mounted switch for general use around the house...

Garnett

Newly Enlightened
Joined
Feb 24, 2007
Messages
89
After having a JET-1 MK fail on me, I'm after a replacement. I'd like to take the opportunity to add a tail-mounted switch to the spec as well. Thanks a lot for any help. In terms of the checklist...

==================Flashlight Recommendation Checklist================

1) How would you prefer to purchase the light?

____I would like to purchase the light in person from a brick and mortar store. I am located in ______________.
____This will be mail-order or Online (location doesn't matter).

2) Budget: An easy question, but you may change your mind after answering the rest! :)

____I don't know yet
____Up to $25.
____Up to $50.
____Up to $100.
____Up to $200.
____Up to $300.
____Essentially unlimited.

3) Format:

____I am not sure, please help me decide.
____I want a flashlight (hand held/self contained).
____I want a self-contained headlamp.
____I want a headlamp with an external pack/power source.
____I want a mounted light (typically for a bicycle or vehicle)
____I want a lantern/area light.
____I want a portable spotlight (it may have an external power source).
____Other ____________________________________________

4) Size:

____MICRO - Keychain size.
____TINY - Every day carry (2-4 inches).
____SMALL - Every day carry (4-7 inches).

____MEDIUM - Holster/belt ring carry. (>7 inches)
____LARGE - Big enough to need its own travel case.
____I don't know/I don't care.

5) Emitter/Light source:

____LED (known for efficiency, longevity, and compactness)
____Incandescent (known for superior color rendition)
____HID (known for max output, but often at the expense of size)
____I don't know.

6) Manufacturer:

____I want to buy a light from a large/traditional manufacturer that is ready to go out of the box.
____I would like a light from a specialty manufacturer (Possibly limited run/Custom).
____I am interested in assembling my own components. (for example a "host" or flashlight body from one manufacturer, and a "drop-in" emitter from another source).

7) What power source do you want to use?

____I intend to use "Primary"/Disposable Alkaline batteries based on the usual AAA/AA/C/D sized cells common to most stores.
____I intend to use "Primary"/Disposable Lithium batteries based on the usual AAA/AA/C/D and CR123 sized cells common to most stores (often a cold weather or long storage choice).
____I intend to use Rechargeable cells (NiMH or NiCD) based on the usual AAA/AA/C/D sized cells common to most stores.
____I intend to use Rechargeable cells based on less common formats (18500 or 18650 Li-Ion, RCR123, et-al).
____I want a light with an integrated rechargeable battery pack.
____I don't know/I need more information on power sources.

7a) If you have selected a rechargeable option
____I want a light that plugs directly into the wall (literally with prongs built into the light)
____I want a light that has a recharging adapter (your typical "wall wart")
____I want a light that snaps into a cradle (usually mounted on a wall)
____I want a separate/stand-alone charger (this involves removing the batteries to charge) (ALREADY OWN)
____I don't care

8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is not a happy experience).

____I want to navigate a dark room or read a map (1-10 lumens).
____I want an indoor "blackout" light (15-50 lumens)
____I want to confidently walk around an unlit/unpaved rural area (60-150 lumens).
____I want to illuminate my entire backyard or a campsite (150-300 lumens).

____I want to illuminate an entire field, the neighbor's front yard several houses down, impress my friends and neighbors, etc. (300-700 lumens).
____I want search and rescue type illumination (800+ lumens).

____SPECIAL NOTE: Burst/Turbo mode Category - There are several lights that will run at a super bright maximum for a very limited period (usually 5-10 minutes) and then will "step-down" to a lower level for thermal control. Check here if this is acceptable.

9) Flood vs Throw: Flood covers an area, Throw reaches out to a distance.

____All Flood: I am doing "arms length" tasks like reading and campsite cooking.
____Wide Flood: I want a defined flood area for semi-close tasks like after-dark campsite tasks or working on a car.
____Narrow Flood: I want a sharply defined flood area that will project some distance for tasks like trail walking.

____Wide Throw: I want a beam with a noticeable hot-center for distance throw and a significant amount of "side-spill". Good for rough trail hiking, search and rescue, and general distance work.
____Narrow Throw: I want a beam with a very tight "hot center" and minimal "side-spill". Good for distance viewing, fog, and looking through dense undergrowth.
____Turbohead: I want a far-distance projector with a sharply focused spot of light and minimal or zero side-spill. Good for extreme distance and impressing your friends.

9a) Distance: How far away will you typically need to see with this light (check all that apply)
____Less than 1 yard/meter (reading, other close work)
____Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
____5-20 yards/meters (check out a noise in the backyard)

____30-50 yards/meters (I have a big backyard)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)
____150+ yards (I am searching from a helicopter)

10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum continuous output).

____Up to 30 minutes (I want the brightest [and potentially smallest] light for brief periods)
____30-60 minutes (I have plenty of batteries just ready to be changed)
____90-120 minutes (Runtime is moderately important, but still not critical)
____3 hours + (I critically need this light to run on max for extended periods in between battery changes/charges).

11) Durability/Usage: Generally the old phrase "you get what you pay for" is very accurate for flashlights.

____Not Important (A "night-stand" light).
____Slightly Important (Walks around the neighborhood).
____Very Important (Camping, Backpacking, Car Glove-box).
____Critical (Police, Fire, Search & Rescue, Caving, Survival).
____I don't know.


12) Switch Size, Type, and location (choose all that apply):

____Any size switch will do.
____I need a BIG switch (I'll be using gloves or have very large hands or coordination issues).
____I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
____I want a momentary switch (Predominantly for use with signaling and short bursts of momentary light only).
____I want a twisty switch (Tighten the head/tailcap to activate, and the light will stay on until the head/tailcap is loosened).
____I want a body mounted switch (near the head, like on a Maglite).
____I want a tail mounted switch (found on the majority of today's high end lights).
____I want a remote switch (usually found on high-end bicycle headlights)
____I don't care.
____I don't know.
____Other, please specify____________________.

13) User Interface (UI) and mode selection. Select all that apply.

____A simple on-off with only one output level is fine for me. NOT OVERLY FUSSED
____I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
____I want multiple light levels. (Some lights have 5-16 light levels.)
____I want a programmable light.
____I want a selector ring.
____I want a strobe mode. (Oscillating pattern to confuse/blind aka "Police Mode")
____I want SOS mode. (blinks in ...---... emergency pattern)
____I want a beacon mode. (Regular flashes at full power to show location.)
____I don't care.
____I don't know.

14)Material/Finish/Coating

____Plastic/composite body (this may limit your choices significantly).
____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today's higher end flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).
____I don't care.
____I don't know.
____Other, please specify____________.

15) Water resistance
____None needed
____IPX4 (Splash resistant)
____IPX7 (Waterproof to 1 meter/30min) NICE TO HAVE BUT NOT ESSENTIAL

____IPX8 (Submersible to greater than 1 meter for 4 hours)

16) Storage conditions
____In house (temperature/climate controlled environment) - MOST LIKELY
____Emergency kit (long standby periods)
____Automobile glove-box (wide temperature swings, long standby periods, critical reliability) - POSSIBILITY

____Other_________________________________________ ____

17) Special Needs/extras: Is there anything else you want or need that hasn't been mentioned? Select any/all below.

____Red filter (for preserving night vision).
____Other filter colors (Amber, Green, Blue, _________).
____Dedicated R/G/B secondary LEDs.
____"Hybrid" light (bright incandescent combined with long running LEDs)
____Pocket/belt clip
____Holster
____Wrist/Neck Lanyard
____Crenulated bezel
____Non-sparking, Intrinsically Safe (IS) for use in explosive environments
 

adnj

Enlightened
Joined
Aug 13, 2006
Messages
699
Take a look at the Lumitop Tool AA (there is also a Tool AAA). You will probably find that it meets all of your requirements.
 

LeanBurn

Flashlight Enthusiast
Joined
Feb 3, 2010
Messages
1,355
Location
Alberta
I can't tell by your form if you want single or multi-mode...

Single mode: Coast HP1 very simple, inexpensive and quite durable.
Multi-mode: Thrunite Archer or Thrunite T10, depending what you like for bells and whistles.
 

adnj

Enlightened
Joined
Aug 13, 2006
Messages
699
Thanks for the suggestions, both.

I'm not familiar with either Lumitop or ThruNite - what's their build quality/durability like?

I own the Tool AAA. Check the interface and the illumination levels to be sure that it's what you want.

It is on par with Felix, Jetbeam, Nitecore, etc. Well made, good knurling and good HAIII match-up. About as good as the early Foursevens lights that I have owned.

At less than $25 (maybe less than $15 if you look around), I would say that it is an excellent buy.
 

Boris74

Newly Enlightened
Joined
Sep 23, 2017
Messages
192
Streamlight protac 1L-1AA. makes a great around the house light. Nice thing about it is being an around the house light is it can use CR123 cells that might be laying around the house, it will even work with aaa, which tend to lay around. Runs great on lifepo4 AA and cr123 cells too.
 

MikeSalt

Flashlight Enthusiast
Joined
Jan 10, 2007
Messages
1,948
Location
Stoke On Trent, Staffordshire, UK
I had a Lumintop Tool AA which was faulty from new. If they haven't bothered to check if it worked properly from new, then you can guarantee that no longevity and field testing has been done. It's a shame, because the Tool Ti AAA I own is fantastic.

My suggestion is going to be to put your money away for now and wait until you have accumulated the funds for a Malkoff. Right there in capital letters of the thread title you stipulate "TOUGH", but I fear that any sub $25 light will disappoint on this requirement, whereas a Malkoff is guaranteed to deliver.

My second pick, still breaching the $25 budget unfortunately, would be a Zebralight.
 
Last edited:

hatman

Enlightened
Joined
Mar 15, 2009
Messages
600
Location
USA
Jaxman E3.

An AA light with high CRI 90 available with either Nichia white 5700K or Nichia warm at 4000K.... Also with Cree XPG2 at warmwhite 5500K rated by the maker at CRI 70.

It's a tail clicky with three modes.

I have four and love them. I run them on Eneloops.

With shipping, I paid about $26 and each light arrived in CONUS in about two weeks.
 
Last edited:
Top