Aurora SH-034 Triple Nichia 219C - LD-A4 - 16500 - Lighted Tail Switch

CRX_

Newly Enlightened
Joined
May 9, 2018
Messages
36
Location
Scotland
Aurora SH-034 - Triple Nichia 219C 5000K - LD-A4 6A - 16500 - Green Rv Clicky Sw - 1970lm.
kK2bQtz.jpg

Stainless steel body
Triple Nichia 219C 5000K emitters
L4P 3XP 20mm DTP copper MCPCB
Carclo 10507 optic
Green GITD glow disc
ARC glass
LD-A4 6A driver
ILC-0 Aqua blue illuminated tailcap switch
Copper & aluminium pill
16500 cell compatible
Length – 87mm
Width – 23mm
Weight – 121g (with 16500 cell)
Max DD – 1970lm - 25s/ 580lm - (65°C)
Max 6A – 1450lm - 30s/ 550lm - (65°C)
Max 4A – 1070lm - 67s/ 380lm - (65°C)
Mode 2 - 377lm
Mode 3 - 130lm
Mode 4 - 24lm
Mode 5 - ML
.

Build:
The pill has been shortened, a copper centre slug installed, sheet copper lined and brass driver ring soldered.
A strip of copper tape on the outside to keep the MCPCB centered and silicone cube against the internal driver.
Copper 0.3mm disc soldered onto driver contact. 22AWG silicone wire is used.

I used 2.5mm copper wire to make a ring and other flashlight parts to make another screw in collar.
Felt strips in the battery tube to stop any rattle.

Aluminium switch housing was filed out, copper lined, transparent washer glued in place and brass ring soldered
on with spring.
The rubber boot surround has an extra angled stainless steel insert and the boot itself has black silicone in it to
give more of a lighted ring effect.
ytErBMx.jpg


Complete.
4Q6qM9s.jpg
 
Top