Some FourSevens Mods

CRX_

Newly Enlightened
Joined
May 9, 2018
Messages
36
Location
Scotland
Some 47's pocket rocket mods I've done.

FourSevens PK Paladin Triple XP-G2 3D - FET 15+1 - 16340 - Rv Clicky Tail Sw - 1900lm.
uF78nE8.jpg

Triple Cree XP-G2 3D emitters on 18mm Noctigon MCPCB
Carclo 10507 optic
ARC glass
MTN 15+1 FET driver
Aluminium & brass heatsink
GITD inserts
Black aesthetics
Reverse clicky tail switch in copper housing
Tritium vial in titanium switch button
Lockout-able
Length – 64mm
Width – 24mm
Weight – 77g (with 16340 cell)
Max DD - 1900lm, 50% - 928lm stepdown 30s.
.
Some Build Pics:

I rebuilt the pill with some copper tube & aluminium bar to accommodate the triple setup.
sSB28Hi.jpg


The reverse clicky tail switch is housed in some copper tube & sheet covered with a silicone boot.
I installed a 4mm x 0.5mm green tritium vial in the titanium switch button backed with glow powder.
Green GITD powder mixed with UV setting glue applied to the front & back inserts and JB Weld in some other side recesses.
Carbon fibre wrap in the battery tube to stop any rattle.
ermjYEE.jpg


Complete.
Gg8H25S.jpg


ma3tCFZ.gif

.
.

FourSevens Mini ML Ti Triple Nichia 219C D320 5000K - LD-A4 3A - 16340 - Rv Lighted Clicky Sw - 1800lm.
dKdzGgv.jpg

Triple Nichia 219C D320 5000K on Noctigon MCPCB
Carclo 10507 optic
ARC glass
Glow disc
LD-A4 3A driver
Aluminium & copper pill
Reverse clicky lighted tail switch
Tritium vial in lanyard slot
Lockout-able
Length – 60mm
Width – 20mm
Weight – 52g (with 16340 cell)
Max DD 1800lm - 60°C, 320lm stepdown 25s.
CC 3A 942lm - 60°C, 270lm stepdown 60s.
yNsXsui.jpg


.
.

FourSevens Mini AA Ti - MT-G2 Q0 5000K - FET 15 - 2x14250 - Rv Clicky Sw - 1600lm.
R26A4o9.jpg

MT-G2 P0 5000K on 16mm noctigon MCPCB
MTN 15mm driver with gupprydrv Rev1
Reverse clicky tail switch
Tritium vial in lanyard hole
2 x 14250 compatible
Heat anodized body
Lockout-able
Length – 80mm
Width – 18mm
Weight – 51 grams (with cells)
Max – 1600 lm
tAqvd9h.jpg


.
.

FourSevens Atom Triple XP-L HI V2 1A - H17-F - 16340 - RV Clicky Tail Sw - 1740lm.
qc6hovJ.jpg

Triple Cree XP-L HI v2 1A on 16mm Noctigon
Carclo 10507 TIR optic
H17-F driver
Reverse clicky tail switch with tritium vial
Cyan GITD tail inserts
Brushed stainless steel body
Custom made magnetic keyring holder with through switch
Green 6mm x 1.5mm tritium vial in holder
Copper lined battery tube
Lockout-able
Length - 56mm
Width - 19mm
Weight - 52g (with 16340 cell)
Max - 1740lm
KvzCpW8.jpg
 
Last edited:

Weld Inspector

Enlightened
Joined
Jul 28, 2016
Messages
444
Location
Michigan
Man! Everyone needs to hit the link to all his mods at the bottom of the thread

Are u going to list any of these for sale are u ope to doing mods for others

The maratac mods are very cool also your full hand mades are very very cool love all the copper!

Those flat rosewood copper triple is very cool
 

Crazyeddiethefirst

Flashlight Enthusiast
Joined
Mar 13, 2012
Messages
2,005
Location
Southern California
Wow, I feel like a toddler with crayons who just met Vincent Van Gogh...I already knew you were talented in designing your own lights, but these mods are amazing! I agree with Weld Inspector's comment above...
 

CRX_

Newly Enlightened
Joined
May 9, 2018
Messages
36
Location
Scotland
:twothumbs OUTSTANDING! :twothumbs

~ CG

Beautiful creative work as always:twothumbs

Wow, I feel like a toddler with crayons who just met Vincent Van Gogh...I already knew you were talented in designing your own lights, but these mods are amazing! I agree with Weld Inspector's comment above...

Man! Everyone needs to hit the link to all his mods at the bottom of the thread

Are u going to list any of these for sale are u ope to doing mods for others

The maratac mods are very cool also your full hand mades are very very cool love all the copper!

Those flat rosewood copper triple is very cool

Thanks very much chaps :thumbsup:.
I do sell lights sometimes when I amass too many. The Revision3 Maratac was built for someone as a request and the Rev1 was sold a while ago.
 
Top