All SOLD: Titanium Lights from my collection
ALL SOLD OR WITHDRAWN.
McGizmo Sundrop XRU 2 Tone/Blasted. [COLOR="#FF00000"]SOLD - $285[/COLOR] $325 $380 $400
McGizmo 3S converter with XM-L2 emitter.
BratGuy Ti clip and black oxide screws.
http://www.indysworld.com/sale/sundrop-2tone-1.jpg
http://www.indysworld.com/sale/sundrop-2tone-2.jpg
http://www.indysworld.com/sale/sundrop-2tone-3.jpg
Mac's Ti Tri-EDC Stonewashed with crenelated bezel and tail flutes. SOLD - $1000 $1250
This was the only one that Mac fluted, and he made this one for himself, but didn't like it, so he sold it.
I've added a Ti boot ring, and a Lux-RC 371D engine, and yellow trits in optic. [/COLOR]
Mac's Customs Jumbo Knurly, bead blasted SOLD - $800
Uses an included 26650.
Comes with 2 Engines:
- triple xp-g2, with 6 green trits under optic
- reflectored XM-L engine.
- both 2.8A on high
I swapped out to a Ti Boot Ring as well.[/COLOR]
Cool Fall Spy 007 XR-E "Cree" Model. SOLD - $875 .
One of the 9 "Cree" XR-E models made back in the day with the mcr17 reflector and slightly longer head.
Emitter has been upgraded to XP-L HI, CCT 5000k+ (not sure but it's up there),
Zirc trit disc with 2 trits installed.
Has normal carry marks.
Has the 1A driver, but with the emitter upgrade puts out a lot of light....
CCT is a bit on the cool side on this one Bottom light in comparison pic), but it actually shows the correct table color that it's laying on....
also includes a NOS Ti opening bead/lanyard I just opened up....
Cool Fall Spy 007 XP-G2 Model. SOLD - $875 .
Has the 1.4A driver. nice beam and color.
Ti trit disc with 4 trits installed
also includes a brass opening bead/lanyard
it's the shorter head one in the pics....
http://www.indysworld.com/sale/spy-pair-1.jpg
http://www.indysworld.com/sale/spy-pair-2.jpg
http://www.indysworld.com/sale/spy-pair-3.jpg
http://www.indysworld.com/sale/spy-pair-4.jpg
http://www.indysworld.com/sale/spy-pair-5.jpg
http://www.indysworld.com/sale/spy-pair-6.jpg
http://www.indysworld.com/sale/spy-pair-7.jpg
http://www.indysworld.com/sale/spy-pair-8.jpg
http://www.indysworld.com/sale/spy-pair-9.jpg
Mac's one off Ti 2x18350 body with Chad Nichols SS Damascus triple head. WITHDRAWN .
Upgrades done in the years I've had it.
Upgraded to Lux-RC 371D A33 XP-L HI 5700k engine on copper pill. have a few other 371d options left in case you want something else emitter wise.
Ice Blue Trits in Optic
Drilled and tapped for clip, by Barry at PrecisionWorks
PhotonFanatic Polished Ti Boot Ring
added Mac Clip.
Mac's first run Ti EDC with AlTiN coating. WITHDRAWN .
This was the only one that was sent off for AlTiN coating. it was never finished and forgotten about for years.
Resurfaced, sold, and had a bunch of work done: was bored for 18350 cells, and Mr. Hanko made a single NW xp-g2 emitter engine for it. I have replaced the optic with a reflector I found to fit it.
The AlTiN coating almost gives it a velvet like feel.
The "scuff marks" on the head actually look like measurement markings from before it was coated...
ALL SOLD OR WITHDRAWN.
McGizmo Sundrop XRU 2 Tone/Blasted. [COLOR="#FF00000"]SOLD - $285[/COLOR] $325 $380 $400
McGizmo 3S converter with XM-L2 emitter.
BratGuy Ti clip and black oxide screws.
http://www.indysworld.com/sale/sundrop-2tone-1.jpg
http://www.indysworld.com/sale/sundrop-2tone-2.jpg
http://www.indysworld.com/sale/sundrop-2tone-3.jpg
Mac's Ti Tri-EDC Stonewashed with crenelated bezel and tail flutes. SOLD - $1000 $1250
This was the only one that Mac fluted, and he made this one for himself, but didn't like it, so he sold it.
I've added a Ti boot ring, and a Lux-RC 371D engine, and yellow trits in optic. [/COLOR]
Mac's Customs Jumbo Knurly, bead blasted SOLD - $800
Uses an included 26650.
Comes with 2 Engines:
- triple xp-g2, with 6 green trits under optic
- reflectored XM-L engine.
- both 2.8A on high
I swapped out to a Ti Boot Ring as well.[/COLOR]
Cool Fall Spy 007 XR-E "Cree" Model. SOLD - $875 .
One of the 9 "Cree" XR-E models made back in the day with the mcr17 reflector and slightly longer head.
Emitter has been upgraded to XP-L HI, CCT 5000k+ (not sure but it's up there),
Zirc trit disc with 2 trits installed.
Has normal carry marks.
Has the 1A driver, but with the emitter upgrade puts out a lot of light....
CCT is a bit on the cool side on this one Bottom light in comparison pic), but it actually shows the correct table color that it's laying on....
also includes a NOS Ti opening bead/lanyard I just opened up....
Cool Fall Spy 007 XP-G2 Model. SOLD - $875 .
Has the 1.4A driver. nice beam and color.
Ti trit disc with 4 trits installed
also includes a brass opening bead/lanyard
it's the shorter head one in the pics....
http://www.indysworld.com/sale/spy-pair-1.jpg
http://www.indysworld.com/sale/spy-pair-2.jpg
http://www.indysworld.com/sale/spy-pair-3.jpg
http://www.indysworld.com/sale/spy-pair-4.jpg
http://www.indysworld.com/sale/spy-pair-5.jpg
http://www.indysworld.com/sale/spy-pair-6.jpg
http://www.indysworld.com/sale/spy-pair-7.jpg
http://www.indysworld.com/sale/spy-pair-8.jpg
http://www.indysworld.com/sale/spy-pair-9.jpg
Mac's one off Ti 2x18350 body with Chad Nichols SS Damascus triple head. WITHDRAWN .
Upgrades done in the years I've had it.
Upgraded to Lux-RC 371D A33 XP-L HI 5700k engine on copper pill. have a few other 371d options left in case you want something else emitter wise.
Ice Blue Trits in Optic
Drilled and tapped for clip, by Barry at PrecisionWorks
PhotonFanatic Polished Ti Boot Ring
added Mac Clip.
Mac's first run Ti EDC with AlTiN coating. WITHDRAWN .
This was the only one that was sent off for AlTiN coating. it was never finished and forgotten about for years.
Resurfaced, sold, and had a bunch of work done: was bored for 18350 cells, and Mr. Hanko made a single NW xp-g2 emitter engine for it. I have replaced the optic with a reflector I found to fit it.
The AlTiN coating almost gives it a velvet like feel.
The "scuff marks" on the head actually look like measurement markings from before it was coated...
Last edited:
