Ozythemandias
Flashlight Enthusiast
- Joined
- Jan 4, 2017
- Messages
- 1,417
Damascus Tain Ottavino V4
Only 25 made
$SOLD300 shipped insured, fees included
Blue tritium in tail and aqua glow around emitter
- PMMA Optic Lens (Convex Lens for flood beam)
- Beefy brass light engine
- Knurling on the head and body(Titanium only)
- Split ring hole
- One 3x11mm tritium slot in the tail
- Tail-stand-able
- Tighten off, Loose on
- Dual stage output
- 10mA, 220mA (low first, high next)
- 14mm x 61.7mm
- 0.9V~1.8V - Alkaline, Ni-MH, primary AAA lithium
- Emitter XPL HI V2 4B(NW)
Operation:
1. Install an AAA size battery into the body tube. ( + ) positive end toward the tail, and ( - ) negative end toward the LED.
2. Fully tighten off.
3. Loose to turn on low.
4. Loose further to turn on high.
$SOLD300 shipped insured, fees included
Only 25 made
$SOLD300 shipped insured, fees included
Blue tritium in tail and aqua glow around emitter
- PMMA Optic Lens (Convex Lens for flood beam)
- Beefy brass light engine
- Knurling on the head and body(Titanium only)
- Split ring hole
- One 3x11mm tritium slot in the tail
- Tail-stand-able
- Tighten off, Loose on
- Dual stage output
- 10mA, 220mA (low first, high next)
- 14mm x 61.7mm
- 0.9V~1.8V - Alkaline, Ni-MH, primary AAA lithium
- Emitter XPL HI V2 4B(NW)
Operation:
1. Install an AAA size battery into the body tube. ( + ) positive end toward the tail, and ( - ) negative end toward the LED.
2. Fully tighten off.
3. Loose to turn on low.
4. Loose further to turn on high.
$SOLD300 shipped insured, fees included
Last edited: