• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired ALL SOLD Malkoff, Nailbender, Peak LED and HDS. PRICE DROPS

nmiller

Flashlight Enthusiast
Joined
Oct 4, 2006
Messages
1,339
Location
Cleveland, Ohio
All prices include shipping in USA. Contact me about international shipping. There may be a price increase and if the package can't be tracked or insured risk is on the buyer. First I'll take it gets it.

1. Malkoff Wildcat V4: This light is like new. No dings or scratches that i can see. It is the NEUTRAL 4000k tint. I think high is about 1000 lumens and low is about 100 lumens. It has three xpg2 LEDs. I'm including an MD2 body with switch and two Solarforce 1xcr123a extensions. This will allow you to run the light in MD2, MD3 or MD4 format. It runs on 1x18650 at a reduced output on high and low. It is not regulated in the MD2 format. I'm guessing high in MD2 format is about 600 lumens and low is about 15. I think I read somewhere that run time on 1x18650 is over an hour. Also included is the Thyrm finger loop with clip and the next torch finger loop. I'd like $190 shipped for it. SOLD

2. Nailbender/Customlited P60: Single more CREE XPE2. Neutral tint probably around 5000k. Reflector is smooth. This one is a thrower. 2.8 to 6 volts. This drop in has very little use. It's too cool for me. $20 shipped. I'll also include 2 AA sleeves for a 3 cell Surefire host. The sleeves that eliminate battery rattle. SOLD

3. Peak Eiger Copper Special Edition QTC: One of the nicest lights I've seen. The copper is beautiful. I don't see a single scratch on it. Recently picked it up in the exchange. I just don't have a good use for it. Comes with the clip in the picture. Runs on aaa batteries and 10440. I'll include an IMR10440. I'm guessing it's the neutral Xpg. Tint is probably around 5000k. It's warmer than my old cool Logan, but it's not what I would consider to be warm. I'd like $75 shipped. SPF..

4. HDS Clicky Head only: I have an older HDS clicky Head modded by Vinh with a xPG2. I was told it's about 4000 or 4500k. I see more like 5000k. My eyes are sensitive to cool tints though. I do see white and no bue or green etc. It's nice, but I'm gravitating to 3000k to 3500k lights. It's only an emitter swap. Light is in excellent condition. I see no damage. It's brighter than my 120 lumen. It has a green sticker on it. I'd like $65 shipped for the head. SOLD
 

Attachments

  • A08FDEF0-066F-4F29-B30F-E8D84B86E507.jpg
    A08FDEF0-066F-4F29-B30F-E8D84B86E507.jpg
    13.8 KB · Views: 383
  • A6D99D98-E9ED-49ED-88CE-7AFBA62DACE7.jpg
    A6D99D98-E9ED-49ED-88CE-7AFBA62DACE7.jpg
    10.8 KB · Views: 383
  • 86305A4C-4F02-4F73-8C75-3C2A5EFCC1F0.jpg
    86305A4C-4F02-4F73-8C75-3C2A5EFCC1F0.jpg
    11.1 KB · Views: 381
Last edited:

nmiller

Flashlight Enthusiast
Joined
Oct 4, 2006
Messages
1,339
Location
Cleveland, Ohio
Re: Malkoff, Nailbender, Peak LED and HDS

More Pics
 

Attachments

  • 23E1450E-7AE8-428D-9286-A5E9DE9292AC.jpg
    23E1450E-7AE8-428D-9286-A5E9DE9292AC.jpg
    13 KB · Views: 374
  • AC1C4005-111A-4FD1-9696-7D16C016AA2F.jpg
    AC1C4005-111A-4FD1-9696-7D16C016AA2F.jpg
    13 KB · Views: 388
  • 43B4DAA0-2D5D-4C08-AFF3-12BABEEFF691.jpg
    43B4DAA0-2D5D-4C08-AFF3-12BABEEFF691.jpg
    19.6 KB · Views: 373
  • 9A6EDC36-29B8-4314-84F7-F2316B23100D.jpg
    9A6EDC36-29B8-4314-84F7-F2316B23100D.jpg
    12.7 KB · Views: 375
  • F12CC847-38D3-4A08-9C52-FEBB615B3293.jpg
    F12CC847-38D3-4A08-9C52-FEBB615B3293.jpg
    9.5 KB · Views: 375

nmiller

Flashlight Enthusiast
Joined
Oct 4, 2006
Messages
1,339
Location
Cleveland, Ohio
Re: Malkoff, Nailbender, Peak LED and HDS

More pics
 

Attachments

  • 7895D8E8-EDE6-4247-9B8E-E0609E173842.jpg
    7895D8E8-EDE6-4247-9B8E-E0609E173842.jpg
    6.6 KB · Views: 367
  • 2E1689BC-C83E-4297-A9F5-69EB0935A092.jpg
    2E1689BC-C83E-4297-A9F5-69EB0935A092.jpg
    12.6 KB · Views: 364

flat-ray

Enlightened
Joined
Nov 17, 2005
Messages
239
Location
Italy
Re: Malkoff, Nailbender, Peak LED and HDS

Does HDS clicky work fine? No bugs in the UI? The mod did not damage tje driver?
 

nmiller

Flashlight Enthusiast
Joined
Oct 4, 2006
Messages
1,339
Location
Cleveland, Ohio
Re: Malkoff, Nailbender, Peak LED and HDS

It is the head only. If you have the tail it works fine. I didn't notice any issues with it. I have a tail, but am keeping it to go with my xpg hicri hds.
 

Greenbean

Flashlight Enthusiast
Joined
Feb 19, 2008
Messages
1,301
Location
WNC
Re: Malkoff, Nailbender, Peak LED and HDS

I'll take the WC please,
 

Greenbean

Flashlight Enthusiast
Joined
Feb 19, 2008
Messages
1,301
Location
WNC
Re: Malkoff, Nailbender, Peak LED and HDS

Paid up,

Thanks.

These make the best glove box lights!
 

nmiller

Flashlight Enthusiast
Joined
Oct 4, 2006
Messages
1,339
Location
Cleveland, Ohio
Re: Malkoff, Nailbender, Peak LED and HDS

Quantum Tunneling Composite. It makes the light have variable output. The more you tighten the head the brighter it gets. Its not exactly finely tuned like an HDS rotary but it is effective.
 
Top