XP-G R5 FS. *Important Notice* - Page 4

DaFABRICATA · #91 10-31-2009, 12:57 AM

Quote:

Originally Posted by R@ndom

All dropped off at PO except for Steve's which i forgot to put the address on and Tim's which needs customs forms.

Do they not supply them for you at the post office?

Please remember to put me down for 1 X 20mm 3-up XG-G board with tightest optics available when you make another run

Thanks again!

R@ndom · #92 10-31-2009, 02:13 AM

They weren't open when I droped them off.

Anto · #93 10-31-2009, 10:25 AM

It seems like people in California have been receiving their emitters already.. I'm still waiting on mine & I got in on that first order.. hope they're not missing.

Greg G · #94 10-31-2009, 09:51 PM

Quote:

Originally Posted by R@ndom

Hi Greg, it'll be cheaper to buy from Cutter direct if you want 10. If you insist that I forward these then that's okay too.

Well if I get them from you I can trust that they get shipped when you say.

I don't like filing PP claims. In the past, Cutter has not thought me an important enough customer to give good service.

Greg

JHanko · #95 11-01-2009, 03:24 PM

I will take (5) on 10mm boards. Just let me know when and where to send Paypal. Thanks!

mfrey · #96 11-04-2009, 04:25 AM

Quote:

Originally Posted by R@ndom

yep, but don't worry, I'll get some more on wendsday. I get a holiday on tuesday.

Today's Wednesday

Icarus · #97 11-04-2009, 05:59 AM

I would like to order:

1 x 7-up XP-G R5's on 40mm board with tightest optic available
1 x 4-up XP-G R5's on 25mm board with tightest optic available
1 x 3-up XP-G R5's on 20mm board with tightest optic available
4x XP-G R5's on 10mm board.

JHanko · #98 11-04-2009, 06:31 AM

for (5) Cree XP-G R5 LED's on 10mm boards. Thank you!

J3004 · #99 11-04-2009, 07:31 AM

I'm interested in:

1 x 7-up XP-G R5's on 40mm board with tightest optic available
2 x XP-G R5's on 10mm board

Thx

greenpea76 · #**100** 11-04-2009, 08:17 AM

I'll take the last 4 bare XP-G's to California.

Sgt. LED · #**101** 11-04-2009, 11:35 AM

I need 2 on 10mm boards whenever you are ready.

dandism · #**102** 11-05-2009, 04:03 PM

I received mine and they were unharmed

. The pvc pipe idea worked!! Thanks George.

-Dan

AlexGT · #**103** 11-05-2009, 05:33 PM

What tint have you guys been getting? I am interested in something in the cree WC tint or Lux XO tint in 15mm boards

AlexGT

nanotech17 · #**104** 11-05-2009, 09:00 PM

they are tiny

George

R@ndom · #**105** 11-06-2009, 07:16 AM

Great to see they're been recieved. Alex, there will be a slight lottery involved. I can test these for tint, but all I have is my eyes, a cr123 and some wire. Sgt, I'll send a PM in 10 hours, it's 1am here.

R@ndom · #**106** 11-06-2009, 07:24 AM

Guys who want optics, you're better off financially buying direct from unless you really want my excellent customer service and fast turnaround time.

I went for a run on wendsday. All were for exsisting orders.

Sorry. greenpea, the bare emitters are taken. All this demand calls for a new run. But please do note that I am very limited on funds right now.

I do have a single neutral xpe on board but nobody's gonna pay shipping just for that... Then again, this board treats LEDs like consumables.

Don't thank me, thank nailbender for his excellent idea with shipping.

syc · #**107** 11-06-2009, 10:25 AM

Quote:

Originally Posted by R@ndom

I do have a single neutral xpe on board but nobody's gonna pay shipping just for that... Then again, this board treats LEDs like consumables.

If it isn't claimed, I'll take the neutral XPE on a board in addition to the 3xR5's on boards. Let me know the total damage and I'll pp you right away.

Steve

maxspeeds · #**108** 11-06-2009, 02:20 PM

Hi R@ndom!

I'd like to order the following when available:
(1) XP-E neutral on 10mm board
(1) XP-G R5 on 10mm board
(1) XP-G R5 on 20mm star

Please let me know when and where to send payment.

R@ndom · #**109** 11-06-2009, 04:57 PM

I'll go for another run once a big order is taken care of. Thanks for the patience guys.

maxspeeds · #**110** 11-06-2009, 08:01 PM

Thanks for helping all of us out, R@ndom! Take your time.

Also, I was curious to know if you could obtain the XP-G on 8mm round boards?

R@ndom · #**111** 11-06-2009, 08:27 PM

Quote:

Originally Posted by maxspeeds

Thanks for helping all of us out, R@ndom! Take your time.

Also, I was curious to know if you could obtain the XP-G on 8mm round boards?

PM replied. Mr Dremel is your friend.

maxspeeds · #**112** 11-06-2009, 08:50 PM

When I look back to see the number of times Mr. Dremel got me out of a pinch, Its safe to say Mr. Dremel and I are the bestest of friends!

Quote:

Originally Posted by R@ndom

PM replied. Mr Dremel is your friend.

R@ndom · #**113** 11-07-2009, 06:01 AM

Guys who want to order LEDs please read first post and get back to me via PM.

olrac · #**114** 11-07-2009, 06:26 AM

I think 1C is probably the most neutral of the three tint bins available.
If they are the only ones available I would probably want 1C.

threekg · #**115** 11-08-2009, 05:46 AM

Hi R@ndom,

If the four remaining bare XP-G R5s are still available, I'd like to take them. I'm based in Australia.

Please do PP me the details, thanks!

Cheers mate,
threekg

AlexGT · #**116** 11-08-2009, 07:57 AM

I would like R5 1C on 15 mm round board, I can wait for them to be available.

AlexGT

olrac · #**117** 11-08-2009, 08:05 AM

Quote:

Originally Posted by AlexGT

I would like R5 1C on 15 mm round board, I can wait for them to be available.

AlexGT

Cutter offers 10mm and 20mm only

okashira · #**118** 11-09-2009, 11:55 AM

I'd like to buy 6x 1C bin bare emitters. I live in USA, TX.

I'm unsure how to calc total... please send me total and payapl addy so I can pay.

thanks.

Greg G · #**119** 11-18-2009, 10:51 AM

I just wanted to say "Thank You" Random. My order came in yesterday.

I really appreciate you doing this for us.

olrac · #**120** 11-18-2009, 12:19 PM

I would like 4 R5-1C on 20mm boards when you do the next run. PM when you want payment. Thanks again!