I need MDC Titanium heads. That would complete my setups.
Yes, I’ve never gotten more than 20% off in the past, so I had to buy some stuff just because.Thanks. I grabbed another MDC cr123 neutral! Great price with the 25% off
I don’t even try to resist, so I’m of no help…Between the wife and I we have 6 Malkoffs. How many lights can you use at once?
I do not need another flashlight....I do not need another flashlight....(repeat several more times).
Very nice! McGizmo AA body is probably the best host I’ve ever felt. I’m eyeballing a 2xAA McGizmo Pak next2nd Kōsen purchase arrived today. (Right).
MDCF AA HCRI-50 and AA McGizmo Malkoff titanium VME head. Currently running 14500 on M361N. I may need to get a McGizmo AA Haiku for the body and a CR123 body for the head and a my 3V M31NLL.
View attachment 86833
Carry On!
What exact battery are you using?Currently running 14500 on M361N
I've had good luck with these.What exact battery are you using?
Nice. I recommend you try theseI've had good luck with these.
https://www.killzoneflashlights.com.../products/evva-unprotected-14500-3-7v-1000mah
FYI, there is apparently some kind of... well, not recall since they aren't doing anything about it. But, issue, with those batteries. My impression is if you have older ones and haven't had a problem, then there is no problem. But newer ones apparently have high self discharge to the point they get hot just sitting outside of a device.Vapcell Purple 1000mah H10 are nice also. 10amp high discharge
I never had an issue. I have the 10amp ones from previous lights, so I use them since I have themFYI, there is apparently some kind of... well, not recall since they aren't doing anything about it. But, issue, with those batteries. My impression is if you have older ones and haven't had a problem, then there is no problem. But newer ones apparently have high self discharge to the point they get hot just sitting outside of a device.
Also the 10 amps isn't really necessary, the 3.8-9v driver in the newest M361 (and newer MDC heads) is rated to pull only 2.2 amps at 3.8v. The older 3.4-6v driver in the M361 pulls even less (~1.5 amps)
Remember, you can only die once. You'll never live to tell about it;-(I never had an issue. I have the 10amp ones from previous lights, so I use them since I have them
First I’m hearing about that. Mine have been sitting for a few months before I used them last with no issues.
Mine have been sitting at whatever voltage my charger sets to “storage mode”
So what’s everyone else using then? What’s the safest alternative?