Show Us Your EDC Folder

[iacchus]

I must have missed it.

 

[LRJ88]

I haven't heard about this, what were the quality issues? I bought for myself and for a friend Sebenza 31 and a small Inkosi, both dated summer 2023. The quality of the new Mangocut steel is very good, the locking with a large ball is also very reliable

Modified 501. Using a dremel, I cut off part of the spring so that when closing the blade does not become dull when hitting it. The side effect was a weaker spring, now you don't have to press with all your might. Initially the pressure on the finger was stronger than on a normal 110, now everything is fine

From what i recall, and mind you this is quite a few years ago, the main issues were the tolerances of the construction leading to blade play, the blade rubbing against the scales despite the knife being assembled properly, the lock bar either engaging too much from factory or not enough, uneven heat treating, just general quality drops which led to more problems down the line since the knives require those tolerances to work as they're intended to. I can't really link to other forums here, but the problems were mostly seen in the 21 and 25 if memory serves, likely because they were the most sold ones.

 

[desert.snake]

From what i recall, and mind you this is quite a few years ago, the main issues were the tolerances of the construction leading to blade play, the blade rubbing against the scales despite the knife being assembled properly, the lock bar either engaging too much from factory or not enough, uneven heat treating, just general quality drops which led to more problems down the line since the knives require those tolerances to work as they're intended to. I can't really link to other forums here, but the problems were mostly seen in the 21 and 25 if memory serves, likely because they were the most sold ones.

Got it, thank you, the main thing is that everything is fine now

 

[LRJ88]

Got it, thank you, the main thing is that everything is fine now

Might even be worth getting one now in that case. I wanted an Umnumzaan back then, but the different stuff popping up scared me off.

 

[Jshtlbt]

Cjrb pyrite

 

[tex.proud]

I picked up the new Spyderco Stretch 2 XL with PD#1 steel. It's larger but lighter than the Stretch 2 K390 due to not having full liners. With only a week of use the verdict is still out, but it may run my K390 Stretch 2 out of its position as my favorite Spyderco.

Carrie On!

 

[BigDeeeeeeee]

How old is that Inkosi? I recall some years ago that CR knives had dropped in quality in relation to some divorce, but i haven't kept up since.

The Carbon Fiber is from early 22, I have a titanium from early 21. Both are excellent, grind lines, locks, blade centering all great.

 

[orbital]

+

Been years since I bought an expensive folder, actually only have my ZT 566Blackwash as a high end folder..

So the other day I pulled the trigger on this 3.75" S35VN blade ~ full titanium frame lock ~ Caged ceramic-bearing system
... weighs only 3.8 ounces

Should arrive Monday , KAVISO collaboration w/ WE Knife

 

[Chauncey Gardener]

@orbital, Congratulations! She's a beauty. (y) (y)

 

[iacchus]

+

Been years since I bought an expensive folder, actually only have my ZT 566Blackwash as a high end folder..

So the other day I pulled the trigger on this 3.75" S35VN blade ~ full titanium frame lock ~ Caged ceramic-bearing system
... weighs only 3.8 ounces

Should arrive Monday , KAVISO collaboration w/ WE Knife

View attachment 69265

Nice one. Properly useful blade shape

 

[SCEMan]

Usually have one of these in my pocket. Matriarch depending on threat level...

 

[IMA SOL MAN]

Usually have one of these in my pocket. Matriarch depending on threat level...

View attachment 81234View attachment 81235

Wow, big price difference between the Matriarch 2 and the Civilian! Not a whole lot of difference in blade length, either. Spyderco must have a fat government contract to get that much money for the Civilian. I wouldn't mind having one, but at that price, I think I'll go with Cold Steel's Black Talon II.

 

[Sabrewulf]

My most carried folder.

Close 2nd.

 

[russprechtl]

One of my favorites - WE Knife Navo.

 

[orbital]

+

it's in UPS hands _

got it brand new $201 + tax , free ship (large online seller)

ZT0562MIC
Ti frame/micarta handle/MagnaCut steel
/// could not pass on that price /// big micarta fan, and ZT, and Hinderer, and Ti, and...

Sold all my ZT except one, this will make two

 

[iacchus]

+

it's in UPS hands _

got it brand new $201 + tax , free ship (large online seller)

ZT0562MIC
Ti frame/micarta handle/MagnaCut steel
/// could not pass on that price /// big micarta fan, and ZT, and Hinderer, and Ti, and...

Sold all my ZT except one, this will make two

View attachment 92657
View attachment 92658

The ZT Hinderer designs are in several ways superior to the knives they are based on. Lot of hand waving issues with stuff direct from Hinderer by the fanboys.

Not that I hate their stuff, I have a 20CV XM-18 as a work knife, and it could take apart a car.
The ZT stuff is smoother though. And you don't have to spend a month dialing in the blade action to get it where you want.

 

[jon_slider]

TS10, Mini Osborne

 

[Candleometry]

My EDC trio: Civivi Baby Banter, Spyderco lil native and Kizer mini sheepdog. All fit in my 5th pocket and can take care of my daily knife needs.

 

[tex.proud]

View attachment 92661

My EDC trio: Civivi Baby Banter, Spyderco lil native and Kizer mini sheepdog. All fit in my 5th pocket and can take care of my daily knife needs.

OOh! a Baby Banter! With a Peak Eiger Ultra

Carry On!

 

[tex.proud]

@Candleometry Do you have any other KNAFS knives? Th O.C.T is a great little blade! Especially the Knifecenter exclusive. Carried with a ReyLight Pinapple Mini. The Ben Blue version is of course awesome!

Carry On!