dwhitebird
Newly Enlightened
- Joined
- Jul 11, 2007
- Messages
- 8
Re: Fenix TK40 part2
Also, the "fancy" plastic case had cracks near the handle even though envelope/packing did not appear to have any damage whatsoever. I have contacted
Fenix and FenixGear for a replacement.
I did not get a braided lanyard with mine. It came with a strap with a spring clip at each end like the one shown in picture of previous thread.
Love the beam. Puts my Tk1 and Tk10 to shame.
I didn't see another thread regarding what caused the light not to work. Did you find the problem?I also had a problem with my new light. I put in 8 Sanyo 2700 NiMH with what I thought was full charge. Light would not come on. Checked and rechecked battery placement with no luck. I then put in Energizer primaries and now works fine. I put the Sanyo's in the Maha 9000 and appears had problem with the batteries but not enough to cause light not to work. Now doing a refresh and will try later. In the meantime I am supposed to get 8 new Eneloops today so hopefully they will be ok.Mine came today. I like the plastic case it came in.
I opened the case and took out the flash light, nice weight (empty). I unscrewed the tail cap, Slid out the battery case and loaded it with eight Radio Crap Alkaline Batts.(after triple checking that all batts were in the right way). I slid the battery holder back in, screwed the tail cap back on and hit the switch..........Nothing:thinking: So I check the batts again, no problem there.
I take the head off and check the contacts clean no residu. I give the contacts a lite scratching just to be sure it is clean. Still nothing.:thinking:
asemble and.....................................
So I take the tail cap off, and disasemble the switch (easy with needle nose pliers) and check the contacts there. Residu is present between gold and alum contacts clean with shirt, re
To be continued!
:nana:
Also, the "fancy" plastic case had cracks near the handle even though envelope/packing did not appear to have any damage whatsoever. I have contacted
Fenix and FenixGear for a replacement.
I did not get a braided lanyard with mine. It came with a strap with a spring clip at each end like the one shown in picture of previous thread.
Love the beam. Puts my Tk1 and Tk10 to shame.