Show your Solarforce

[will]

Got my four HA III L2P lights. One thing - the colors are deeper than most of the pictures I have seen.

 

[ssvqwnp]

Are you referring to the logo on the head and the logo on the body? If the parts were molded it could be done, but with machined parts I would think the parts would have to be logo'd as an assembly.

Yes, I was in reference of the L2T "Caution Hot Surface" lettering on the head not lining up with the lettering on the L2P body, but I realize each light is probably just a little different from the next, even in the same model line.

I have a few Lego'd parts that don't line up and it kind of irks me, but I try to get over it.

Those little lanyard rings and such that I put between the tailcap and body really throw a wrinkle in things, too... 3-way mismatch! :shakehead

 

[SCEMan]

My latest addition for nightly walks. The Cryos helps to keep the UF XM-L 3-Mode on High (direct drive)
from getting too toasty.

 

[Black Rose]

Nice looking light SCEMan. What's the clip from?

 

[SCEMan]

It's a NovaTac "old style" clip. They used to be easy to get but not anymore...

Nice looking light SCEMan. What's the clip from?

 

[Olli1783]

my Solarforce EDC

 

[RepProdigious]

That is quite sexy

Yeah, im really in love with this light. Here's an up-close shot of the working end :devil:

 

[tjswarbrick]

I've got an L2T and a Blue-HAIII L2P with flat stainless bezel on the way - along with Warm OP XR-E and 5-stage SMO XP-G.
I don't plan to lego them, but will try to post pics when they arrive.

Fast shipping!
My L2T and blue L2P were at the door Saturday. I wasn't home, so I picked 'em up yesterday.
I haven't been able to wrest the camera from my wife, so no photos yet.
Also, the blue is a "gift" to myself for early next year - so I'm trying to maintain willpower and not open it.
From the blister pack, though, the blue is MUCH darker than shown on the website. More of a deep denim than bright royal blue, and matte - no shinyness.
I actually like it a lot better this way, and hope the G10 on my new knife (that I got it to match) follows suit.

My dog and I enjoyed the L2T on our walk last night. But the CR123's I popped in were nearly dead (2.35V/ea,) so I couldn't test the throw or total output of the 5-mode XP-G drop-in. On Med and even Low, it still lit the path quite adequately, where there was no streetlight. Beam looked nice, and quite neutral. Batts also rattled a bit - I wrapped the fresh ones I put in this morning in electrical tape - Silence!
If I was going to use it for walking, I'd probably pop off the cigar ring. However, since I got it as a bike light, I'll leave it as a little extra security in case the velcro strap loosens while riding.

Overall, I'm very pleased. These probably won't be my last Solar-Force lights. (I'm already thinking of a Masterpiece as a high-beam for the bike...)

 

[don.gwapo]

New and last acquisition.

Until a new style host from Solarforce will become available. .

 

[yarney05]

My Solarforce EDC

 

[Deaj]

 

[tjswarbrick]

I've got an L2T and a Blue-HAIII L2P with flat stainless bezel on the way - along with Warm OP XR-E and 5-stage SMO XP-G.
I don't plan to lego them, but will try to post pics when they arrive.

I took a shot of the blue one.
The tailcap switch was a little hard to access, and tailstand was a little wobbly, so I ground some crenelations in the tail, and put an o-ring between the switch boot and tailcap. Perfect!

- Tom

 

[Acid87]

Looks like you have a MPP-2 is there a noticeable difference compared to the MPP-1?

I ask because I have the 1 and was considering getting the 2 just because I fancy it. Thoughts?

 

[pomp92]

Mine is all done!!!

Old dropin and body but new head/bezel/tail! Now its perrrrrfect!

Wow, that's beautiful! I need it, I need it!!!
I hope you don't mind if I copy the idea!?..

BTW guys which drop-in do you recommend? I need a bright one (maybe 300lm ANSI) with at least 3 modes.

Tomorrow I'll add pictures of my 3 Solarforce flashlights.

 

[dsche]

Carclo 10048 fit Solarforce head (with little filing))

 

[andi15]

Thanks for the info!

Do you have Beamshots?


Greetings from Germany

 

[dsche]

andi15, no beamshot yet; working on heatsink

Hope it's be ready next week

 

[flashmenow]

My latest Solarforce L2P in blue, stuffed with a QUAD with blue glow. :naughty:

 

[RI Chevy]

Real nice light! What would the advantage with a quad LED versus a single XM-L? THe color is very striking. Hopefully they will produce another run. The HAIII is also very nice.

 

[pomp92]

Real nice light! What would the advantage with a quad LED versus a single XM-L? THe color is very striking. Hopefully they will produce another run. The HAIII is also very nice.

Quote, same question..