Updated throw specs measured at the same time, same set up.
All at 1-2 sec. All cells 4.15v or higher.
KR1vn90 Cu = 127Kcd
KR1vn90 = 123Kcd
D4SvnSuper W2 = 114Kcd
FW1Avn W2 = 60.5Kcd
FW3Tvn Quad W2 = 41.5Kcd
FW3Tvn Triple W2 = 40Kcd
D25AvnSFT40 = 38.1Kcd first reading, quickly drops to 33Kcd
E05vnSFT40 = 36.8Kcd first reading, quickly drops to 32Kcd
The E05vnSFT40 measures between 2040L and 2275 depending on the specific H10 cell that used (I measured three of them). Even if you subtract 5-10% for 6500 color temp, nothing else I can think of comes close in the world of 14500 flashlights.
I run all of my VN2 EDC lights in VN2 group13, which is the 100-70-50-15-5-1 mode group. It's gives me instant max output for carry but I can half press through to lower outputs in less than a second. "Setting "1" or the 6th step provides what appears to be abut 15-20L. I ran the light is this mode 8 hours overnight and the H10 cell still had 3.96v resting. Basically you could use it all night switching between the 5th and 6th steps and still have battery left. These are also the two outputs I typically use on my night walks. So it can work as a very bright tactical light and "survival" type light, with the wide output range.
Having a ton of fun with these 14500 SFT40 lights. I wish I had discovered them sooner.