meeshu
Enlightened
Looking at getting a battery charger with battery/cell capacity (discharge) analysis.
Requirements are -
* mains powered
* charges NiMH cells primarily, but preferably charges Li-Ion batteries/cells as well, including LiFePO4 and, if possible, 3.0V regulated/protected RCR123 at 4.5V(?)
* discharges, cycles, and analyzes cells (and displays cell discharge capacity in mAh)
* charge current should be adjustable down to 100 mA (or even lower if possible)
* should have at least two independent charging slots
* takes batteries from AAA size up to around 18650 size
The two chargers that seem to meet most requirements I've found so far are -
SkyRC MC3000
ISDT C4
Any other suitable chargers, please?
Requirements are -
* mains powered
* charges NiMH cells primarily, but preferably charges Li-Ion batteries/cells as well, including LiFePO4 and, if possible, 3.0V regulated/protected RCR123 at 4.5V(?)
* discharges, cycles, and analyzes cells (and displays cell discharge capacity in mAh)
* charge current should be adjustable down to 100 mA (or even lower if possible)
* should have at least two independent charging slots
* takes batteries from AAA size up to around 18650 size
The two chargers that seem to meet most requirements I've found so far are -
SkyRC MC3000
ISDT C4
Any other suitable chargers, please?