Moddoolar head question

[jbbknives]

Can someone more knowledgeable with moddoolar heads tell me if the head in the picture matches the head in the description?

It says it's an H3 head. I'm not so sure.
Any help?

 

[IsaacL]

"H" indicates 15W and "3" indicates three modes. No way to tell whether it's an H1, H3, L1, or L3 without seeing the text inside of the bezel. Not sure why someone would lie about it though... It's definitely a Moddoolar head if that's what you're worried about.

 

[jbbknives]

Like here?

 

[jbbknives]

Just wondering if I got what I thought I was buying

 

[IsaacL]

Looks like one of the original heads circa 2011. See this thread.

As far as configuration goes, Dan or Tom will have to answer.

Like here?

 

[jbbknives]

Hmm. So I was mislead?

 

[RI Chevy]

From the Oveready website:

MODELS:

Name Voltage 2cell (1cell)* Modes Tint
Triple/60 H1c 1-2 cells 1600L (1200L) H Cool
Triple/60 H1n 1-2 cells 1100L (780L) H Neutral

* Lumen outputs are LED rated values based on power, out the front values will be less

Universal Name Key: LEDcount / Format [space] Power Modes Tint
(not all options available on all models or formats)
LEDcount: 1 (single) or 3 (triple)
Format: 60 (drop in) or M2 (head)
Power: L (low) or H (high) or D (direct drive)
Modes: 1 (high) or 3 (high, medium, low)
Tint: C (cool) or N (neutral)

Version History

• 4.00 - add H (high output) model
• 4.00 - add cell count detection (1 or 2)
• 4.00 - add low voltage reduction (10% at 3.4v per cell)
• 4.00 - add low voltage cutoff (0% at 3.0v per cell)
• 4.00 - add thermal protection (10% at 65C)
• 3.10 - add reverse cell protection
• 3.10 - reduce intervals for mode changes & resets
• 3.10 - increase medium mode from 20% to 30%
• 3.10 - add brief softstart to each mode
• 3.00 - add high, medium, low operation
• 3.00 - add full regulation
• 2.00 - direct drive
• 1.00 - first version

Just try and match up your numbers.

 

[jbbknives]

Is the head in this picture an H3 HML Cool XPG2? Or is it an older model?

 

[jbbknives]

Here is some close up pics of writing in the head.

 

[chengkhi]

Brad, am glad you are asking questions here as i was about to do the same...
i shipped you the exact item i bought, i am not a torchlight expert but as replied to you, thats what i bought from the invoice...

Will let the experts answer...

 

[jbbknives]

All I want to know is if the head that I received is what you described in the original for sale thread

 

[jbbknives]

So you are saying that Oveready shipped the head in your pics and my pic below to you on February 12 2014?

 

[chengkhi]

All I want to know is if the head that I received is what you described in the original for sale thread

Yes it is the original ... I received it and shipped the same item, i only have 1 moddoolar in my house...
bought it in feb 2014, used it a few times and sold to you the same...

 

[jbbknives]

Ok. I hope they can confirm that.

 

[chengkhi]

So you are saying that Oveready shipped the head in your pics and my pic below to you on February 12 2014?

my pics were taken when i posted my for sale thread... Then i took some more of it when i shipped it... You have the link to all the pics i took... I never took the head apart and this was my 1st moddoolar. The quality of the head is there, i mean there's no reason for me to even change any parts on the head. i did not even open the head at all like yr pics as its working perfectly...

 

[chengkhi]

Ok. I hope they can confirm that.

Yes, i hope the folks at oveready can confirm it and assure you. i sold this cos i have a alpha blue label for replacement.
i still stand by my promise, if you are not satisfied, return it via shipping in good condition and i refund you minus shipping charges..

 

[jbbknives]

I appreciate you. I just wanna make sure what I got was an H3 xpg2 head.

Thank you

 

[Grizzman]

This is an interesting thread.

Subscribed.....

 

[jbbknives]

This is an interesting thread.

Subscribed.....

Can you say if this is an H3 xpg2 head by looking at it?
I'm new to this so I don't really know.

 

[Grizzman]

No, I can't. I've never personally seen a head that doesn't have the version, level sequence, etc visible from the front, as depicted in post 2. It's possible (but I have no idea how likely) that the identification strip simply wasn't applied when it was manufactured, and it fully matches the invoice.

Typically, I'd look at the boards that the emitters sit on to determine whether it's an XP-G vs XP-G2. Or at the emitter themselves to determine if it's a different emitter entirely. The optic doesn't allow them to be seen well enough for identification.

Do the tint and level sequence match what it's supposed to be?