Sold/Expired P60 modules - warm, neutral, cool white/XPG- XML / SST-50 -90 P60 modules (part 8)

[Valmet62]

Dave,
Is it possible to get a T30 flux bin E7 3000K Warm White, 3 level ( Low / Med / High ) drop-in without memory ? Just wondering if that option is available.

Thanks
Valmet62

PS: I just got two drop-in's and love them ! :thumbsup:

 

[kccustom]

Cree XM-L Module
T50 flux Bin E3 4500K neutral white LED
1 Level
OP Reflector
2.8A Drive Level
L2P Host

 

[Mark A]

Cree XM-L $40 2.8-6 volts
T50 flux Bin E3 4500K neutral white
3 level Low / Med / High with memory 2.8 amp
OP reflector
potted with tape $5
International delivery $5

Will be used in a Solarforce L2P host with an AW18650 2600 or Ultrafire 2400 both protected.

Sent $50 via paypal - Transaction ID: 6UW16652N9054183G

New to this so let me know if anything is incorrect.

Thanks

 

[antikythera]

Anybody?

Hi,
I'm looking to put the brightest light in my mostly-stock C2 as possible (using a 17670).

What combination of LED and 3-mode driver (LMH) would give me the greatest number of lumens @~4500k (thereabouts), with about an hour of runtime on high, and a balance between spill and throw? I think an XM-L 4500K driven at 2A might work, but I'm not sure. Any suggestions would be welcome.

Thanks!

 

[JoVo]

Hello Nailbender,

for the following drop in:

Cree XP-G -$35
1 level 2.8-6 volts
Q23000K 7A3 (90 minimum CRI) NEW
Orange Peel Reflector
for SureFire C2
Thermal Potting $5
International shipping 5$

TOTAL 45$

Thank you!

Kind regards from Germany,
Jonas

 

[KillyMcGee]

What other info or specs do I need to pick?
Cree XML
Used in my 6p
Three mode
Potted
Don't care the tint/color

 

[KillyMcGee]

I can't pm as Im new. Where do I paypal to?

 

[amraspalantir]

hi,
i have a stock dbs v3 with xre-r2 and running on 2 x cr123's. is your xm-l pill drop in ready to my stock reflector (no modding
to be done)?i will be using my dbs stock smo reflector. also what advantages does your new xr-e optic module have over my stock module?better throw or narrower beam?i assume this is also a direct upgrade to it.

thanks

 

[wamcneil]

I can't pm as Im new. Where do I paypal to?

Post #1- "MY Paypal info in biography ". Click nailbender's name an look around in his profile.

 

[KillyMcGee]

Guess I was too new here. The forum wouldn't let me look at someone's profile until I had enough posts. Thanks

Cree XM-L
T50 flux bin E3 4500K neutral white
2.8-6v 2.8a
3 level L/M/H
OP reflector
Potted
$45
Unique Transaction ID 6MD8856466681830L

 

[recDNA]

Will any of your drop ins produce full output using 2 X L91 Lithium Single A primaries in a Dereelight Javelin host? If so any suggestions which would be best?

 

[brandocommando]

$90.00 for 2 P60 modules,

4500K neutral white XML
3 level low/med/high
OP reflector
2.8 A
thermally potted

3000K warm white XML
3 level low/med/high
OP reflector
2.8 A
thermally potted

Thanks Dave!

 

[Voider]

Dave,

Cree XM-L $40
T50 flux Bin E3 4500K neutral white
Single Level
2.8A
Regulated
Smooth Reflector
Potting with tape $5
For Surefire 6P used as weaponlight in .308

$45 PP Sent

Thank you.

 

[Rat]

Need my 5th, 6th & 7th Bender modules please. I should be almost there now.
For those that have not got one of Daves modules wake up and see the light. XM-L smooth reflector rocks.

The XM-L smooth I have is one of my favorite modules and I have all the fancy quads and triples so that's saying something about Dave's modules.

- Cree XM-L Cool White
- 2 level Hi / Low PUSHED 3.1amps
- 2.8-6 volts (Regulated with memory)
- smooth reflector : $40
- Thermal Potting : $5
- Int. Shipping : $5


- Cree XM-L Cool White
- 1 level PUSHED 3.1amps
- 2.8-6 volts (Regulated )
- smooth reflector : $40
- Thermal Potting : $5
- Int. Shipping : $5


Optics XRE emitter
- Cree XRE Cool White
- 3 levels high /med /low memory (I would prefer single mode if possible)
- 3.6 - 8.4 volts (Regulated with memory)
- 2 optics $40
- Thermal Potting : $5
- Int. Shipping : $5

Total $150.00 bargain
All will be going into Surefire M2's

EDIT:

 

[wamcneil]

deleted

 

[mojospapi]

Whew! So many choices. So much info. This can be a bit overwhelming. But yes! There will be light @ the end of the tunnel (pun intended).
Trying to package up 3 modules for Nailbender. Hope I got it right. Dave, you have a PM. Tnx!

 

[jhamm12]

Hi Dave,

I'm wondering where the lumens are posted regarding your p60 XML dropins? I am planning on buying a p6 or c2 surefire host for one of your dropins.

Thanks for the help.

 

[jhamm12]

Need number 5, 6 & 7 Bender modules please. I should be almost there now.
For those that have not got one of these modules wake up and see the light.

The XM-L smooth I have is one of my favorite modules and I have all the fancy quads and triples so that's saying something about Dave's modules.

Hi Rat,

What are the number 5,6 & 7 Bender modules? It sounds like they must be good. Obviously, I'm new. So, Thanks in advance for the help.

 

[mojospapi]

Nailbender, PP sent: Payment Sent (Unique Transaction ID # XXXXXXXXXXXXX643T)
(1)
XRE is $35
5 levels
smooth
neutral
(1)
XML is $45
T50 flux Bin E3 4500K neutral white
2 levels
smooth
(1)
dual XPG is $50
5 levels
2.8-6 volts
OP
R5 6500k - 1B / 1A / 1T tints
(1)
Dummy CR123 spacer
and MANY THANKS!

 

[Vootman]

Hello, I would like

Cree XM-L 3000k Warm
2.8-6 volts
3 level L/M/H
regulated
2.8 amps
SMO reflector
potted

For use in Solarforce L2T with AW 18650 2900 mah.

$45

PP sent, Unique Transaction ID # 2ET53605AN533752J. Thank you!