retired Instruction Manual - a joint CPF effort

Status
Not open for further replies.

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

Chevrofreak was kind enough to send me the graph files for his runtime tests, and I finally was able to get them opened. I'm going to edit them and make two charts, one for levels 1-2-3, and one for levels 4-5-6. This looks much better IMHO.

Hods, I'm not sure if the light is meant to be run at 1250mA for the duration? Dave?

:thumbsup: john
 

PoliceScannerMan

Flashaholic
Joined
Jul 25, 2005
Messages
9,561
Location
Gainesville,FL
Re: SPY 007 Instruction Manual - a joint CPF effort

Runtime at 1250mA would also be interesting - it seems to rip through primaries.

I'm more than happy to fund the battery usage but don't have the kit to produce runtime graphs!

I would advise against that, unless you are good at replacing emitters! I would think a solid runtime @ 1.2A would ruin the emitter.
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

If you got em, smoke em! :D

cowboysmokingvu4.gif
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

Post #2 updated with new runtime charts created with Chevro's data! :thumbsup: I split 'em up into two charts, to perhaps provide more clear results.

:) john
 

Scottiver

Enlightened
Joined
Jul 7, 2005
Messages
585
Location
California
Re: SPY 007 Instruction Manual - a joint CPF effort

Post #2 updated with new runtime charts created with Chevro's data! :thumbsup: I split 'em up into two charts, to perhaps provide more clear results.

:) john

Ah, much better now, thanks! :twothumbs
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

I really do have better things to do (like work)... but is work really "better" than playing in Photoshop??

spypumpkinsj9.jpg

Spy 007 Instruction Manual - Halloween 2008 Revision! (Actual changes were made as well)

:D john
 

Hodsta

Flashlight Enthusiast
Joined
Jun 14, 2007
Messages
1,352
Re: SPY 007 Instruction Manual - a joint CPF effort

EDITED: one for the question thread.
 
Last edited:

X_Marine

Enlightened
Joined
Jan 15, 2007
Messages
711
Location
Houston, Tx
Re: SPY 007 Instruction Manual - a joint CPF effort

I believe Data requested a cropped pic of the split ring for the manual.
Spy007SplitRing.jpg

Hope that is small enough.
Thanks
X/BillyD..
 

reptiles

Enlightened
Joined
Nov 26, 2001
Messages
364
Location
Philadelphia PA
Re: SPY 007 Instruction Manual - a joint CPF effort

Under Care & Cleaning...

I have been using on my Spy 007 with a Foaming Glass Cleaner that is safe for Tinted Windows with a Microfiber Cloth.

It really brightens up the Ti and won't scratch at all.

Also no lint.

FYI...

I use Mother's Chrome Polish (at any automotive store) on all my titanium lights. My Spy007 never looked better after a 20 min. buffing.

Cheers,

Mark
 

reptiles

Enlightened
Joined
Nov 26, 2001
Messages
364
Location
Philadelphia PA
Re: SPY 007 Instruction Manual - a joint CPF effort

Please consider the following addition for section 2 Changing Batteries:

Before placing new batteries into the Spy007, ensure that the rotary switch is in the "off" position by turning the knob fully counter-clockwise (facing the flat top of the knob.)

Regards,

Mark
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

Please consider the following addition for section 2 Changing Batteries:

Before placing new batteries into the Spy007, ensure that the rotary switch is in the "off" position by turning the knob fully counter-clockwise (facing the flat top of the knob.)

Thanks Mark! :wave:

We put this in section 2:
"When changing batteries use power-up-0 (the switch set to the off position)."

:) john
 

Hodsta

Flashlight Enthusiast
Joined
Jun 14, 2007
Messages
1,352
Re: SPY 007 Instruction Manual - a joint CPF effort

Thanks Mark! :wave:

We put this in section 2:
"When changing batteries use power-up-0 (the switch set to the off position)."

:) john


PATE NATS to you John:nana:

That's Positive At The Emmiter, Negative At The Switch. I like to add a little Gaelic tone and in my mind and add circumflexes and accents as appropriate but can't find them on my keyboard.:shrug:

Clearly pate can be mushroom or ardennes depending on your sensiblities:D.
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

Clearly pate can be mushroom or ardennes depending on your sensiblities:D.

Speaking of mushrooms... Hods, have you eaten any strange-looking ones lately?? :poof: :duh2: :whoopin:

:nana: john
 

Hodsta

Flashlight Enthusiast
Joined
Jun 14, 2007
Messages
1,352
Re: SPY 007 Instruction Manual - a joint CPF effort

:mecry:

Anyone got a good nmemonic to help me remember which way to put the cells in? My memory isn't what it was, must be all those drugs!:p
 

reptiles

Enlightened
Joined
Nov 26, 2001
Messages
364
Location
Philadelphia PA
Re: SPY 007 Instruction Manual - a joint CPF effort

Thanks Mark! :wave:

We put this in section 2:
"When changing batteries use power-up-0 (the switch set to the off position)."

:) john

Ok, looks better now, thanks :) I like the addition of where "off" is located in that section.

Although the term "power-up 0" isn't introduced until section 5 and probably doesn't mean much in section 2.

Regards,

Mark
 

jch79

**Do Not Feed The Vegan**,
Joined
May 2, 2006
Messages
3,661
Location
On the asphalt.
Re: SPY 007 Instruction Manual - a joint CPF effort

Good call Mark - I'll put a "See section 5 for more info" on that. :thumbsup:
 

Data

Flashlight Enthusiast
Joined
Feb 18, 2005
Messages
3,298
Location
PA, USA
Re: SPY 007 Instruction Manual - a joint CPF effort

:mecry:

Anyone got a good nmemonic to help me remember which way to put the cells in? My memory isn't what it was, must be all those drugs!:p

You could, if all else fails, look inside the light! :p
 

Hodsta

Flashlight Enthusiast
Joined
Jun 14, 2007
Messages
1,352
Re: SPY 007 Instruction Manual - a joint CPF effort

You could, if all else fails, look inside the light! :p

Yes, thanks Dave!. Funnily enough I mostly (though not exclusively) use my Spy in the dark!:p
 
Last edited:
Status
Not open for further replies.
Top