Sold/Expired *SOLD* custom made forward-clicky switch for SF P/G/C/Z tailcap

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Hi

bxstylez,
Wiggle,
Eric242,
ecallahan,

I shipped your switches on 4/8. If you didn't get the tracking number, please let me know.

Thanks again.

 

[nailbender]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

i just wanted to say I have changed all my switches over. The instructions worked great and the switches work good.
They make modes work much easier.

Thanks for a great product

Dave

 

[yazkaz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

So there's no chance or possibility to increase the amperage rating even a bit (to ~3.5A)?
And will the second batch of switches be the very last ones?
Also is there any quality difference between both batches?

 

[ROK]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

for switches.

 

[Bullzeyebill]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

So there's no chance or possibility to increase the amperage rating even a bit (to ~3.5A)?
And will the second batch of switches be the very last ones?
Also is there any quality difference between both batches?

Maybe reducing resistance of tailcap spring by running braided copper wire from bottom of spring to top. Use solder. Like some of the resistance fixes for Mag D springs.

Bill

Bill

 

[ambientmind]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

for two sets, thanks!

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

So there's no chance or possibility to increase the amperage rating even a bit (to ~3.5A)?

No. It's still 3A. Sorry for that.

And will the second batch of switches be the very last ones?
Also is there any quality difference between both batches?

The quality is the same.

Thanks.

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Maybe reducing resistance of tailcap spring by running braided copper wire from bottom of spring to top. Use solder. Like some of the resistance fixes for Mag D springs.

Bill

Bill

I didn't disassemble the switch myself yet but it's not like Mag switches. The current limitation isn't caused from the battery contact spring.

Thanks.

 

[Bullzeyebill]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

I didn't disassemble the switch myself yet but it's not like Mag switches. The current limitation isn't caused from the battery contact spring.

Thanks.

The spring is part of the tailswitch and if you can reduce resistance somewhat then maybe more current can flow through it. The switch is rated for 3A's because the switch will offer too much resistance at 3+A's and will get too hot, possibly causing failure or a reduction of voltage delivered to an LED, or reduced voltage to an incan bulb. This is a simple explanation, but anything that can be done to reduce resistance in the switch will allow more current to pass freely.

Bill

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

ROK,
ambientmind,

I shipped your switches on 4/11 morning. If you didn't get the tracking information, please let me know.

Thanks again.

 

[yazkaz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

If the max current rating can only be 3A then so be it.
I may still be ineterested in getting one of these, but I need to know if the second batch would be the very last ones available.

 

[bxstylez]

Re: FS: custom made forward-clicky switch for $urefire 6P/G2 (also fit P/G/C/Z tailca

for 2 more switches

.

 

[Eric242]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Eric242, I shipped your switches on 4/8.

Arrived save & sound today, thank you :thumbsup:
Eric

 

[vrocco]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Paypal sent for 2 switches. Thank you!

 

[jnr4817]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

paypal sent for 2 switches.

thanks.

 

[Badfish]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Hello,
I'll try these out- they sound pretty good-
for two switches :thumbsup:-

-badfish

 

[Cosmo7809]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Hey, just want to confirm if you have any left. If so I will take one!

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Sorry for the late reply. Just went abroad for a few days and lack of Internet access.

If the max current rating can only be 3A then so be it.
I may still be ineterested in getting one of these, but I need to know if the second batch would be the very last ones available.

Yes, they're the latest batch.

Thanks.

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

bxstylez,
vrocco,
jnr4817,
Badfish,

Sorry for the delays. I shipped your switches on 4/18 morning. Tracking number updated in the PayPal transaction. If you didn't get the info, please let me know.

Thanks again.

 

[NetKidz]

Re: FS: custom made forward-clicky switch for Surefire P/G/C/Z tailcap

Hey, just want to confirm if you have any left. If so I will take one!

Yes, they're available. Quantities are updated in the first post.

Thanks.