The new little NiteCore: "EZAA" Part 2

EngrPaul · Mar 28, 2009

[continued from Part 1]

:hairpull: <<< Icon because we are addicts and need the info!

There's a new AA light from NiteCore that is almost as small as a AAA light.

How did they do it? Alien technology. :naughty:

No available for preorder.

There is now an official 4sevens announcement now.

Knowns:
Called the "EZAA".
Twisty operation.
Uses AA cells.
83.0 x 16.6 mm (3.27 x 0.65 in).
Weighs 20g without cell (0.7 oz).
Has two modes, off-low-high twisty (same UI as lummi raw?)
Anodized black HA-III and typical NiteCore knurling.
Will have a slick rechargeable feature.
Meant to be a Keychain light,
-Has holes in the tail for split ring,
-A swivel clip for keychain attach will be provided.
-No pocket clip planned, but there are two "extra" holes for it

1/4" tripod mount in the tail.
Has a cool white Cree XR-E LED
-Some warm whites (100 lumen) can be ordered (with delay)
Head will be sealed (not easy to change emitter)
Brass heat sink
130 lumens for "up to" 90 minutes
15 lumens for "up to" 20 hours
Current Regulation - No PWM
IPX-8 Water Resistance
2V maximum voltage input
Not polarity protected
-wrong insertion can lead to permanent damage.
Preorders ship around 4/7/2009

shadeone · Apr 8, 2009

selfbuilt · Apr 8, 2009

shadeone said:
here are important links of interest for everyone:

Good link summary shadeone.

FYI, I have just updated my EZ AA review with the Lo mode alkaline run results.

loanshark · Apr 8, 2009

Great job on the review selfbuilt, as usual. I was wondering what light is represented by the light purple line on the Lo mode alkaline run?

mighty82 · Apr 8, 2009

loanshark said:
Great job on the review selfbuilt, as usual. I was wondering what light is represented by the light purple line on the Lo mode alkaline run?

They are all listed. The light purple line seems to be the Jetbeam E3P.

loanshark · Apr 8, 2009

Thanks mighty82, I got mixed up looking at the runtimes. I couldn't understand why there wasn't one that was shorter than the EZAA. Now I realize with the sharp initial drop, the EZAA makes it down to 50% first. Even though it still runs a bit longer than the Jetbeam E3P below 50%... I expect to make a full recovery someday!

Southernlight · Apr 8, 2009

Dont forget the link to Nitecore's official site, with a page on the EZ AA

http://www.nitecore.com/products/ezaa/

Perfectionist · Apr 9, 2009

Would love to see a pic of the EZ next to the LRI Proton and Fenix AAA !!

AardvarkSagus · Apr 9, 2009

By the way, My review is up HERE and HERE.

EngrPaul · Apr 9, 2009

In case anybody else hasn't been informed, I just found out they won't ship until 4/14.

If you're like me, you may not have gotten notification by email. :sick2:

qip · Apr 9, 2009

didnt you check the sale thread, they have the nitecores but not the secret usb thingy so if you want your light now let them know and they will ship now but you lose the power source

Crenshaw · Apr 9, 2009

I'm waiting for the Warm Whites anyway....so as long as i get one in warm white, not to worried about the waiting time...

Crenshaw

selfbuilt · Apr 10, 2009

UPDATE: NITECORE ANNOUNCES EZ AA PRODUCT RECALL

I have been in contact with NiteCore (aka EDGETAC) throughout the review process, and have shared with them my results regarding the apparently reduced output on the EZ AA Lo mode (and corresponding reduced output/runtime efficiency). They have advised me that they are issuing a product recall for the first batch of lights.

Full details available here:
Notice of Official Recall of NiteCore EZ AA Flashlights

I will keep you posted of any updates I receive from NiteCore regarding a replacement/revised model for re-testing.

:wave:

AardvarkSagus · Apr 10, 2009

Wow, I heard they were doing something, but I didn't know it was this major. That's some serious action. I'm intrigued to see this level of dedication to quality.

swiftwing · Apr 10, 2009

Woah, this is excellent news, from a customer service perspective. Not so excellent from a light addict waiting for his next hit perspective of course.

Flying Turtle · Apr 10, 2009

I guess we can assume 4Sevens will hold off on any mailings of the pre-orders next week. Now I'm really not sure what to do. I'd almost convinced myself I liked the idea of a lower low, even with the poor efficiency. Hard to imagine NiteCore would send out a faulty first batch of a highly touted new light.

Trying to think positively.

Geoff

sabre7 · Apr 10, 2009

A faulty first batch implies poor quality control. I wonder whether it is actually a recall, or emergency redesign in an attempt to salvage rapidly diminishing interest and sales?

swiftwing · Apr 11, 2009

sabre7 said:
A faulty first batch implies poor quality control. I wonder whether it is actually a recall, or emergency redesign in an attempt to salvage rapidly diminishing interest and sales?

Doesn't really matter to me, it shows that they care enough about their reputation to do something about the issues raised. That's more than can be said for alot of companies out there.

Everybody makes mistakes, that Nitecore is stepping up and fixing this one of theirs speaks well of them.

Sgt. LED · Apr 11, 2009

AWESOME!

I am so glad it is being recalled. Now I can look forward to it and a new review all over again!!!!!!!!!!!!!

I think I might go ahead and order again! After this I KNOW they are not going to let this light out into the world without being just right.

:twothumbs

jslappa · Apr 11, 2009

^^^^I Agree with SGT LED and other positive thinkers. For those who think this is an emergency redesign or an attempt to peak consumer interest, I'm pretty sure that's not the issue. Although I only have a bachelor's degree in business management, I can tell you that missing a release date is something NO company wants to do. Too many consumers are quick to order a similar light by the competition. Furthermore, this complete and total recall is going to cost Nitecore a bunch of money. The money is going to come directly from their cash-on-hand and directly affects their bottom line numbers. Even with a great launch, first quarter will not look they projected, and that throws off the rest of the year's projections, too.

Clearly, Nitecore cares about their reputation, and sees their viability in the marketplace for years to come. That's why they are taking steps now to fix a problem before it reaches consumers. I salute them and hope they can fix the issues soon.

While I did cancel my preorder, I ordered another D10, clip and slotted piston. When the EZ AA's are available and the reviews are favorable, I'll pick one up for sure.

The new little NiteCore: "EZAA" Part 2

Flashlight Enthusiast

Newly Enlightened

Flashaholic

Enlightened

Enlightened

Enlightened

Enlightened

Enlightened

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashlight Enthusiast

Flashaholic

Flashlight Enthusiast

Newly Enlightened

Flashaholic

Enlightened

Newly Enlightened

Flashaholic

Enlightened

Similar threads