Sold/Expired WTS - Lumintop Tool AA Set, Maglite AA Pro+, Solarforce P1D

[pc_light]

Several lights that were bought and briefly tried, now for sale. Items are either new or like new. Photos are of the actual items for sale.
(Paypal, shipping w/in U.S. only.)

Maglite AA Pro+ Gift Box Set (Still available)
Lumintop Tool AA Nichai219C Set (sold)
Solarforce P1D w/3.04A 3000K XM-L (sold)
----------------------------------------------------------

Maglite AA Pro PLUS (2-level/High-Low version) in Gift Box set, New and Unused - $25
This is the 272 Lumen version with XP-G2.

(Purchased using some expiring store credit. Throws surprisingly good and has a nice tint, I will gladly keep if doesn't sell, but it's here for 10% less than Amazon in case someone was considering one.)

(below items are sold)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Lumintop Tool AA Set, with custom upgraded Nichia 219C 4000K CRI92 - $25 (Sold)

(Got this as part of a package deal, nice but don't really need, so LED upgraded to make it more desirable for Tool AA fans.)

Solarforce P1D host SMO w/3.04A 6-mode Driver w/XM-L 3000K (warm) 80CRI emitter -$38 (Sold)

(Bought as a hefty host for a triple build but ironically I found the combination overkill, the solid copper triple pill was plenty of heat sink by itself. So I put in a different P60 drop-in to complete the light. Both host and drop-in never carried and like new.)

Thanks for Looking.

 

[grateful1]

I'll take it:
Solarforce P1D host SMO w/3.04A 6-mode Driver w/XM-L 3000K (warm) 80CRI emitter - $38

 

[BitGeek]

I'll take the Lumentop

 

[troutpool]

Backup on the Tool AA, please.

 

[pc_light]

Backup on the Tool AA, please.

Sorry, Tool AA sold.

 

[neutralwhite]

can that Maglite be Modded to a 5mm Yuji? thanks.

 

[pc_light]

can that Maglite be Modded to a 5mm Yuji? thanks.

Hi Neutralwhite, not really. The driver current and reflector configurations would preclude this being an option. If a "neutral (warmish)" tint is your goal it might be possible to reflow a Nichia onto the existing driver/pill, I've never tried on a Maglite AA Pro. I have put a neutral XP-L into a brass pill in an old AA mini; it was a fun mod.

If a 5mm Yuji LED is your goal, the conversion some people have done would be to a Maglite AAA Soliraire, again, I've never done something like this myself; or an old incan AA Mini, the most fun one can have for a few bucks.

Frankly this light is very nice as is without any conversion. It has 2-levels, descent throw and the LED(cool) is not angry blue or green.

Thanks for your interest.

 

[david57strat]

I'd gladly have snapped up that P1D/warm combo; but I was too slow on the draw.

Enjoy your new purchase, grateful1!

 

[david57strat]

Just out of curiosity, what were the six modes, on that P1D drop-in?

 

[pc_light]

Just out of curiosity, what were the six modes, on that P1D drop-in?

FWIW,

Driver details -
CF 17mm 3V - 4.5V AMC7135 x 8 3.04A 6-Mode LED Driver Circuit Board
- for Cree XM-L (3A LED)
- double Gold plated contacts
Product Specifications:
Input Voltage: 3V - 4.5V
Current: Max. 3A
Mode: Lo:380mA > Med:1100mA > Hi 1:2200mA > Hi 2:3040mA > Strobe(8Hz) > SOS
Note: Turn off the light at any mode for more than 5 secs, it backs to Lo mode.
Feature:1. Constant current
2. Low voltage protection function (Flashing below 3V)
3. Battery reverse protection
4. Short circuit protection
5. Overheat protection

Emitter details -
Cree XMLBWT-00-0000-000HT30E7 3000K 220lmn 700mA, 80 CRI°

 

[grateful1]

I'd gladly have snapped up that P1D/warm combo; but I was too slow on the draw.

Enjoy your new purchase, grateful1!

I'll keep you in mind if it's a catch and release.
I'm trying out various lamps for the Mrs. (doing search and rescue training with the pup).

-------------------------------

Oh yea. Light received....thanks very much!