.
Got in touch with Brian at Cryos
[email protected]
These inbound from Canada (I'm not sure if more will be made anytime soon...)
I think what's left is: Blemished are discounted...
1 natural cryos cooling bezel (z44) (original smaller head) Blemished
7 black cryos cooling bezel (z44) (original smaller head) Blemished
2 cryos M2 cooling bezel in
copper (M2 bigger head) Blemished
Some Tail-Caps raw aluminum Un-Blemished
Some M2 cryos cooling bezels in raw aluminum (M2 bigger head) Un-Blemished
Some info he passed on as far as parts you need...
Z44 bezel ring and lens:
For the standard bezel I would recommend a lens with a diameter of 28.6mm and an o-ring with an OD of 30.0mm. I run mine with a lens thickness of 2.0mm and an o-ring thickness of about 2.8mm so as long as your combined thickness is somewhere around 4.8mm you should be good to go using any standard bezel ring designed for the surefire 6p.
Lumens factory carries both lenses and rings.
Lens:
https://www.lumensfactory.com/en/product_detail.php?pid=457
Bezel ring:
https://www.lumensfactory.com/en/product_detail.php?pid=338
- Do the Z44 and the M2 share the same lens. You gave me the Z44 lens link below. If they are different can you give me the link for the M2 Lens...
They also carry the M2 lens here:
https://www.lumensfactory.com/en/product_detail.php?pid=462
If not then you can try to source lenses that are approximately 31.5mm x 2.85mm. I previously purchased them from
flashlightlens.com but it doesn't appear they carry them anymore. I had one spare that I am including for you. The M2 heads all include the required o-rings for the lens so all you'll need is 3 more lenses to use them.
The 6P host comes with the required o-rings on both ends so you won't need anything else.
Thanks,
Brian
----------------------------------------------------------------------------------------
Glad to hear everything arrived and that you like them! Those rings are spacers to use in the M2 heads if required. The stock M2 head has a shock absorbing feature which was removed in our design which results in a longer distance between the host to the glass. Drop-ins with springs can make up that distance with the spring but if you were to use a springless drop-in, the spacer is required to make up the gap to maintain contact between the host/battery and drop-in.
The 4th o-ring is already installed in one of the M2 heads so I have provided 4 of those spacers total for the 4 M2 heads.
Hope this helps!
Brian
EDIT: Added more info
www.cryosillumination.com
