here im bending the legs
heres the legs bent and in place
legs soldered in place and LED+ LED- soldered on.
place the LED wires so they'll line up with the board.
LED wires trimmed and Vin placed and set(epoxy) in place
board set with gnd (black wire)
also place the spring holder thing on and set it.
sit place battery contact and mark
cut it off a little above the mark.(cutting it keeps it from hitting the board)
notch the 2 sides (this keeps the contact from falling out)
place the spring on and solder the gnd wire on.
here im pressing the head back in...
for sale here