In search of 1000 hours of moonlight with an AAA cell

Candle Power Forums

Help Support Candle Power:

Hmm, while I really am interested in seeing 1000 hours, I'm not willing to invest the time and resources to somehow make that work. My current setup has the Zebra at around 37C, I'll just see how that goes this go around.
 
Hmm, while I really am interested in seeing 1000 hours, I'm not willing to invest the time and resources to somehow make that work. My current setup has the Zebra at around 37C, I'll just see how that goes this go around.
Oh, totally fair. That would be a lot of work to do precisely, ie in a controlled temperature environment.
I think you’re going to get 1000 just as it is!
 
The Zebralight H53c N on level 2 (0.07 lumen) with a AAA lithium primary cell is at 895 hours, and the cell voltage is down to 1.51 V out of the light. Once the cell voltage gets much below 1.5V it really starts to drop off in voltage quickly as the load continues. Only 105 hours to go, thinking it could happen yet . . . .
 
The Zebralight H53c N on level 2 (0.07 lumen) with a AAA lithium primary cell is at 895 hours, and the cell voltage is down to 1.51 V out of the light. Once the cell voltage gets much below 1.5V it really starts to drop off in voltage quickly as the load continues. Only 105 hours to go, thinking it could happen yet . . . .
1006 hours and still going, the cell is now at 1.45V.
 
The only real way to beat this runtime at this output is a simple boost/resistor circuit, lol...holy cow, what's the voltage safe low shelf?
Not sure what you're asking, but the cell will work down to around 1.4V then drop off very fast. I haven't measured the current lately but it's somewhere between 1 and 2mA. I think the light is specified to work down to 0.7V.

1757781948312.png
 
Not sure what you're asking, but the cell will work down to around 1.4V then drop off very fast. I haven't measured the current lately but it's somewhere between 1 and 2mA. I think the light is specified to work down to 0.7V.

View attachment 84516
Nice! I just wasn't sure if lithium primaries are as finicky as their rechargeable counterparts when discharged very low...
 
Sooo...2 month runtime attempt, then? :grin2:
Yeah, I'll let it continue until there's no light left yet. I'd be surprised if it lasts more than a few more days. 42 days and counting, doubt it will make it to 50 days.
 
42 days and counting

the spec is 84 days from an AA 2450mAh Eneloop

if the testing battery now is AAA 1250mAh Lithium Iron Primary.. by extrapolation, it would meet capacity spec right around day 42, which it has already achieved....

impressed I am.. thanks! ;-)
 
Last edited:
thanks.. your AAA tests were illuminating ;-)

any more tests planned?
 
Last edited:
thanks.. your AAA tests were illuminating ;-)
:LOL:
any more tests planned?
Nothing definite. I started to consider getting a lithium rechargeable AAA that outputs 1.5V to see if it might run longer. But, without doing math or thinking much, I think that the lithium primary AAA stores more juice. I'm also ready to use the headlamp for an upcoming trip, so I likely won't do any further testing until at least November.
 
Back
Top