Surefire e2dl ultra

Gather App
Candle Power Forums

Help Support Candle Power:

I've got to stay out of this thread. I bought an X300U to replace my old weapon light and an E2DL U .. I can't decide which I'm going to open first :(

(Probably the E2DL U)
 
Tuna said:
Guess which light is new...
Click to expand...

This might have been asked already,

The ultra looks really long, how much longer is it than the Ican E2D defender?
Is the Backup really that long as well with only one cell?
I assume you can only use LiPo cells for rechargeables and NOT 3.7 cells.

Thanks,
Dan
 
Grizzman said:
My Ultra arrived today.

The beam pattern really is as different from the standard E2D LED Defender as I've been led to believe. This is a good thing, since it differentiates it further from the other TIR'd lights.

The body and tailcap are fully E-series compatible which I was expecting/hoping to be the case. The knurling may be slightly more aggressive than my other like new E2L and L4 bodies. There is a second spring attached to the head.

For those interested in aesthetics, the anodizing matches quite well between body and tail. The head has a noticeably darker color, when viewed in really good light. It's very utilitarian compared to the natural anodizing of the E2L, L4, and LX2. I'm also very glad they've included the two-way clip on this iteration, since I've standardized on bezel down for all carry lights.

The tint is definitely greener than I would prefer, but this isn't much of a surprise. I've always really liked the white tints of my LX2 and E2D LED.

As expected, the level switching is performed in the head. I prefer the 15 lumen low of the LX2 over the 5 lumen low of the E2D LED. I'll know more about this low after it gets dark enough to see more than just the spot.

It slaughtered my LX2's reading at one meter of 9.30 Klux by delivering 18.36 Klux. Both lights were run off fresh CR123 cells. Oh ya, I'll be taking more measurements at 100 yards with this sucker in the near future.

Grizz
Click to expand...

Thanks for posting lux readings compared to an LX2! :thumbsup: I must admit, this light is quite tempting.
 
The only three negative aspects I've found so far are the length in pocket when carried bezel down (very tolerable but not perfect), the tint (only matters in white wall hunting),and the price.

I'm very glad I bought it, and I expect to have it for a loooooong time.

Grizz
 
Grizzman said:
The only three negative aspects I've found so far are the length in pocket when carried bezel down (very tolerable but not perfect), the tint (only matters in white wall hunting),and the price.

I'm very glad I bought it, and I expect to have it for a loooooong time.

Grizz
Click to expand...

That's a pretty fair assessment. The first time I pocket carried the Ultra it was decidedly uncomfortable while driving. This can be overcome with a little positioning within the pocket but as you said, it's not perfect in that regard.
 
Got my ultra a couple of days ago. Impressive little light. Very well built. Feels good in the hand. I have a fury also. And, comparing between the two, its a bit of a toss up. They both have there strengths and weaknesses. I personally love the tint. Mine does not buzz. This will bump the E1B out of my pocket for awhile. Carried the fury for a good awhile also. But, for me, it was a bit large, and carrying it in the back pocket was uncomfortable. The e1b is the perfect size for me personally. But, it just doesn't have the power I need to handle my common tasks. Hopefully since the ultra is a bit smaller in diameter then the fury. It will be comfortable to carry in the front pocket. I plan to really put it though its paces.
 
Flashlight Dave said:
My new LX2 Ultra Defender.






Finally it lives!

Now if I could only get rid of the pointy things on the bezel.
Click to expand...

How do the modes behave with that LX2 Resistor Tailcap?

Getting rid of the pointy bezel is easy and will net you 10~15% more real OTF lumens (mainly in the spill). Lux remains the same.


I get sandpaper and have at it. I did it to many of my E-series lights and it always nets more real OTF lumens. A better 99% UCL lens would give you an extra 5~10% more OTF lumens as well, but then you would need to know how to open this bezel.


bigC
 
Yesterday my E2DL arrived, also in the photo the EB1, the photo gives the false impression that the EB1 is slightly larger in comparison then it is. I do Think the EB1 is slightly more greenish, but its beamprofile is smoother, and the percieved difference between 200 lumens and 500 is really not THAT much of a deal. They basically just arrived but I think they both will come in handy. The EB1 I will try out as my new EDC replacing my legacy HDS, and the E2DL will go into my EDC backpack.
DSC00774_zps6de97133.jpg
 
Last edited:
I bought Sean's and I love it! I got to test it out in quality darkness in the woods above Santa Maria CA. Nothing hides in that beam! I got mine holstered in a Maxpedition 5" holster.

kelmo
 
Awesome reviews!!! I was thinking I might want to get the new ultra, but after seeing this I'd rather have the Fenix I think.
 
I've been reading this thread since the start and quite a bit of good info., actually a ton. I was kinda waiting for the rumored LX2 after seeing the prototypes at SHOT, as the switching works quite well in use with weapon handling and everyday chores, but of course it is no longer an option for production. Then I saw the thread and announcements regarding the new E2D Ultra and was intrigued. Thought it might be a great EDC light for use while at work and off. So, I picked one up. It is pretty cool, super bright, compared to my old E2D LED that was a constant companion. It works into being a very useful EDC light. However, the new pocket clip in bezel down with the shortened DNA collectors is a bit hard on pockets, depending on pocket material. I was thinking a long pocket clip set up to carry the light bezel up would remedy this. The head/bezel area is a good size for grabbing to remove quickly from the pocket carry position. The current clip doesn't seem be super secure in bezel up carry, if I could tighten it up to make it have some more tension, that might work as well. Just my .02 cents. Now for that 500 lumen Scout head replacement.....
 
My original E1b and original E2DL seemed dim by today's standards. My early Fury, of course, blows them away. I wanted an EB1 and the Ultra. I EDC my old E1b, so I added the EB1 first - neat. Now I 'have' to get the Ultra... is there no end? A wiseacre recently suggested I didn't have to buy a new flashlight... I could just change the batteries! They don't understand... heck, I don't! Thanks for all the info, folks - I still want an Ultra!
 
I bought an E2DL Ultra and used it for about a week. I loved the light, but opted to wait for the LX2 Ultra and had a friend buy it off me that couldn't find one. In the meantime I picked up an EB1
 
You must log in or register to reply here.

Latest posts

Back
Top