jamesmtl514
Flashlight Enthusiast
looks to be the surefire 3P.
Surefire Lego?
- Thread starter flash_bang
- Start date
LightJunk
Enlightened
It's an L60 body.
Solscud007
Flashlight Enthusiast
Possibly a 1xCR123 FiveMega round body?
LightJunk
Enlightened
It's a knurled L60 body with an old style Z32 head.
An aluminum ring is added to the tail caps internally and I add a spacer on top of the RCR123A :naughty:
Last edited:
Solscud007
Flashlight Enthusiast
Here is my latest Lego thanks to my recently acquired M962.
This is a 2xcell M3
This is a 2xcell M3
Solscud007
Flashlight Enthusiast
Actually I must retract my previous statement. Well partially. The 3P does not have knurling. However my 3BL does.
Here are some pictures of my 1xCell legos.
My "round 6P"
2way Solarforce clip on U2
Here are some pictures of my 1xCell legos.
My "round 6P"
2way Solarforce clip on U2
Solscud007
Flashlight Enthusiast
Got some new toys today. G2X Pro. I love the nitrolon clicky tailcap. It works so well on my frankenstein G2Z
angelofwar
Flashlight Enthusiast
Thanks WRX! I updated the pic's to include the A13 and the dedicated fore end housing.
PCC
Flashlight Enthusiast
Is this the ultimate Surefire Lego? Cut down Solarforce L2 bezel with stainless steel bezel ring, bored out LU60 to allow both an LED drop-in and an 18mm diameter battery, slightly shortened A21, and a stock Z41 twisty tail cap. The drop-in is a ThruNite XP-G reflector combined with a pill that came from a TLS TX-3 with an XP-G emitter purchased from KD and a Shiningbeam "perfect regulation" driver. Unfortunately, a CR123a primary doesn't have enough voltage to drive that driver in anything other than low mode. When I put on the Solarforce L2 rear body section (you get one if you take a Solarforce L2 body, boil it, then separate the two halves) I can then fit an 18650 Li-Ion and I get all three modes.
With the Solarforce L2 rear body section it's shorter than your average 6P. Here it is beside my G2X Pro and the G2XP is the same size as my 6PL.
I originally started this project to make the entire front section fit a modified Solarforce L2 tail cap that would be wired to an external battery pack to make a bike headlight. I still need to put those parts together to complete the project.
With the Solarforce L2 rear body section it's shorter than your average 6P. Here it is beside my G2X Pro and the G2XP is the same size as my 6PL.
I originally started this project to make the entire front section fit a modified Solarforce L2 tail cap that would be wired to an external battery pack to make a bike headlight. I still need to put those parts together to complete the project.
Kestrel
Flashaholic
C'mon folks, this is the SureFire Lego thread.
One (out of three major) components Solarforce, ehhh...
Two out of three ... :whistle:
One (out of three major) components Solarforce, ehhh...
Two out of three ... :whistle:
Last edited:
Solscud007
Flashlight Enthusiast
RobertM
Flashlight Enthusiast
Got some new toys today. G2X Pro. I love the nitrolon clicky tailcap. It works so well on my frankenstein G2Z
That looks really cool. What head is on this?
Solscud007
Flashlight Enthusiast
It is from a Surefire 8NX.
red_hackle
Enlightened
ronac
Enlightened
Here's my Surefire for now. I'll have a C2 body coming soon and hopefully I'll pull the trigger on a nicer drop in as well.
angelofwar
Flashlight Enthusiast
Awesome looking light Red-Hackle! I want an C-toM adapter so bad, but don't want to thrash a perfectly good KL3 to get one...the regualted runtime is too good.
Ronac, what alien spaceship did that head come from?
Ronac, what alien spaceship did that head come from?
ronac
Enlightened
Shameful plug :shakehead
Cryos Cooling Head
Here's my other Surefire Lego. It's only kinda lego though.. Its like drilling holes in the bricks and screwing them together... Not sure if that still counts :nana:
Cryos Cooling Head
Here's my other Surefire Lego. It's only kinda lego though.. Its like drilling holes in the bricks and screwing them together... Not sure if that still counts :nana:
Last edited:
