The Official Zebralight Thread

[ilikeguns40]

Mines a little lighter. I like it better

 

[gurdygurds]

Mines a little lighter. I like it better

From the pic you sent it looked like the SC53c ano, but the pic I posted above looks like a much lighter gray

 

[jon_slider]

Wait a second here. Did they go back to a lighter gray anodizing with the SC54c N? Most pictures I’ve seen make it look the same as the SC53c n, but this pic is throwing me for a loop.

mine is not as light as that

I hope yours gets here soon ;-)
This is stock G5:

This is my G6:

how will you program your G6? ;-)

 

[ilikeguns40]

I’ve noticed mine looks much lighter while outdoors in natural light

 

[Msf]

Wait a second here. Did they go back to a lighter gray anodizing with the SC54c N? Most pictures I’ve seen make it look the same as the SC53c n, but this pic is throwing me for a loop.
View attachment 78446

My SC54c N is still the dark green just like the SC65c HI. Not sure what’s going on in that picture.

 

[dc38]

My SC54c N is still the dark green just like the SC65c HI. Not sure what’s going on in that picture.

Their HAIII was inconsistent between batches in the past, it might still be inconsistent now. It does seem to be a tough type of real HAIII though.

I hope @Lips doesn't mind me referencing his post:

Post in thread 'The Official Zebralight Thread .' https://www.candlepowerforums.com/threads/the-official-zebralight-thread.395603/post-5531685

 

[ilikeguns40]

Yeah, whatever tint the finish is it does not matter, it’s all just as good and still HAIII

 

[ilikeguns40]

Definitely looks much lighter in sunlight

 

[gurdygurds]

Definitely looks much lighter in sunlight
View attachment 78506

It’s GLORIOUS!

 

[Beard Man]

You can practice here https://josherick.github.io/zebralight-ui/

So there is no way from "OFF" to go to M1 without turning "ON" H1 for a millisecond ?

 

[ilikeguns40]

So there is no way from "OFF" to go to M1 without turning "ON" H1 for a millisecond ?

Yes there is. Program G6 and swap H1 and M1

 

[Beard Man]

Yes there is. Program G6 and swap H1 and M1

So there is no way from "OFF" to go to H1 (If I swap H1 and M1) without turning "ON" M1 for a millisecond ?

 

[ilikeguns40]

No. Would have to swap

 

[Beard Man]

Not a very good UI.
To go to MODE 2 from :OFF", MODE 1 always turns "ON" for a millisecond period of time.

 

[ilikeguns40]

You can literally program G6 and G7 to whatever modes you want.

From off. I make one click medium levels

From off. I make high levels double click

From off. Hold for low levels

I never get a millisecond of high modes if I need to use medium modes when I turn on as you would in the stock G5 configuration

 

[Beard Man]

Ok, I can go from "OFF" to the lowest low mode just press and hold, right?
But again, if I press and hold it slightly longer it will cycle through L/M/H ...

 

[Beard Man]

You can literally program G6 and G7 to whatever modes you want.

From off. I make one click medium levels

From off. I make high levels double click

From off. Hold for low levels

I never get a millisecond of high modes if I need to use medium modes when I turn on as you would in the stock G5 configuration

Right, but: From off. You make high levels double click and medium level first goes on for a milliseconds?
You can't pass medium level without turning it on for a very short time.

 

[Beard Man]

You can literally program G6 and G7 to whatever modes you want.

From off. I make one click medium levels

From off. I make high levels double click

From off. Hold for low levels

I never get a millisecond of high modes if I need to use medium modes when I turn on as you would in the stock G5 configuration

Yes, but you get a millisecond of medium mode if you need to use high mode.

 

[ilikeguns40]

Right, but: From off. You make high levels double click and medium level first goes on for a milliseconds?
You can't pass medium level without turning it on for a very short time.

Yes but you won’t notice the medium levels or get blinded at night when trying to access the lower modes

 

[Dark_Hater]

The way I have mine set up and prefer to use is by clicks. The only time I hold the switch down is for near max or max output.
That leaves me with two modes with a sub level each that can be any of the 12 available outputs that Zebras provide.

The absolute only thing I hate about Anduril is having to wait on the ramp to get what I want. With ZL I get near instant access to exactly the level I desire in one or two clicks from off or turbo with a hold.