Surefire MODs

[F89]

Re: L2 XPH50

I stand corrected! It does work off of a single cell. I did not realize the 16650 I had was at 3.8 volts and the L2 did not turn on. I used a freshly charged rcr123 and it does light up so, 1 cell will work with the stock driver but the XPH.50 will not see its full potential but will be a large improvement over stock.

Still running great (on 16650) even for extended runs on high.
This light is the best thing I've had for close up stuff, better than any mule etc that I've tried.

[/IMG]

First time adding a pic. Hope you don't mind Nitroz.

 

[Nitroz]

Re: L2 XPH50

Still running great (on 16650) even for extended runs on high.
This light is the best thing I've had for close up stuff, better than any mule etc that I've tried.

First time adding a pic. Hope you don't mind Nitroz.

Not at all.

I think the reflector looks pretty cool like that. And man what a photo! What camera was used for that?

 

[F89]

Re: L2 XPH50

Not at all.

I think the reflector looks pretty cool like that. And man what a photo! What camera was used for that?

Yeah the reflector does look pretty cool and the way it smooths and blends the light is excellent. I really like this light.
Thanks for the photo comment, I was actually trying to quickly come up with something as I had to find an image hosting site in the time I had also.
The camera is a D7000 but the lens is a nice macro (105mm, f2.8).

 

[dmprice79]

Re: WIP: Surefire L1

This is still a work in prgress. But here are some photos.

Machining the pill for the 16mm noctigon U4 XM-L2.

Body bored to accept 17650, or in this case 17670.

More photos to come later. I blew a fuse on my lathe and had to order more, so it is down until the fuses come in. Arrrggghhh!

Due to a request for throw I have switched this to a reflector and a XP-E2 torch LED that will be fed 1.4 amps to the LED.

Custom glow ring

Hello, do you mod L1 flashlights for customers?

 

[Nitroz]

Re: WIP: Surefire L1

Hello, do you mod L1 flashlights for customers?

Yes I do. PM me for details.

 

[System1459]

Nitroz, some great stuff here. I tried to PM you about moding my U2 ultra, but don't have enough posts to allow It and don't have enough knowledge to contribute to the forum yet haha. Looking for a better Led and bored out.

 

[Nitroz]

Nitroz, some great stuff here. I tried to PM you about moding my U2 ultra, but don't have enough posts to allow It and don't have enough knowledge to contribute to the forum yet haha. Looking for a better Led and bored out.

Email me. [email protected]

 

[Nitroz]

Kroma with McR20s reflector and 5000k XP-L2

Well this is the first for me. I modded this Kroma with a McR20s reflector and a 5oook XP-L2. I think I have finally perfected the "SF" glow button.

Here's some pictures.

 

[Nitroz]

Re: Kroma with McR20s reflector and 5000k XP-L2

Here is another mod from the "Z" factory.

This time we have a Surefire M1.

• 22 mode programmable circuit, 1.4 amp high
• Bored body to accept 18350 cell
• Machined copper heat sink for maximum cooling
• Pushes about 400 lumens on high

Now for the pics!

 

[marinemaster]

Hi,

Wanting to mod my E2L one level 45 lumens. Just want to swap with a newer and more efficient led to go from current 9 hours to possibly 20 or 30 or 40 or however many hours. Same 45 or 50 lumens is fine.
Will the same electronics work ? I don't want to change that. Is there a particular led that will work better ? also a warm tint will be good.
Input appreciated.

 

[Nitroz]

Hi,

Wanting to mod my E2L one level 45 lumens. Just want to swap with a newer and more efficient led to go from current 9 hours to possibly 20 or 30 or 40 or however many hours. Same 45 or 50 lumens is fine.
Will the same electronics work ? I don't want to change that. Is there a particular led that will work better ? also a warm tint will be good.
Input appreciated.

PM sent!

 

[KeyGrip]

PM sent about modding my U2 and L4, thanks! :twothumbs

 

[Nitroz]

PM sent about modding my U2 and L4, thanks! :twothumbs

PM sent!

 

[Nitroz]

Nitrolon G3Z

Here is a project that I worked on for someone here, I am sure they will chime in once they see this, or maybe it will just be a secret forever.

This is a Nitrolon g3 that was turned into a G3z, sort of.

On with the pictures.

And the finished product.

And for fun, here is a blooper that will be turned into something special. Basically I thought the person wanted it to look like a 9z and be smooth. Totally my screw up!

 

[Nitroz]

Re: Nitrolon 9Z

Here is a G3 that was transformed into a G3Z and not leaving any of the grid.

This light belongs to novice and the idea was his to completely remove the grids from the light.

All dress up!

Side by side photo with a stock g3.

 

[nbp]

I had seen the pic of the G3Z with the partial waffle left on from the light's owner recently - that looks really cool!

 

[flat-ray]

Re: Nitrolon 9Z

This is a nice mod!

 

[JWRitchie76]

Re: Nitrolon 9Z

Hello Nitroz. PM sent about some possible Surefire work. Thanks!

 

[Nitroz]

Re: Nitrolon 9Z

Hello Nitroz. PM sent about some possible Surefire work. Thanks!

PM replied!

 

[Nitroz]

I had seen the pic of the G3Z with the partial waffle left on from the light's owner recently - that looks really cool!

Thanks!