Recent content by HiltiHome

fenix-store
  1. HiltiHome

    Blackshadow Terminator (4xXM-L T6 NW, 4x18650) Review

    Did anyone measure the PWM frequency? PWM frequency higher than 4KHz, would be ok. I'm sold on this light, but visible PWM flickering is a deal killer for me.
  2. HiltiHome

    CBA II from Westmoutainradio died, how to repair?

    Thanks Russel! That helped a lot.
  3. HiltiHome

    CBA II from Westmoutainradio died, how to repair?

    Hi, this thread is for the battery guy from German messerforum.net. His English is even worse than mine, so I'm doing the post. Some of his Battery Reviews here: http://www.messerforum.net/showthread.php?109979 His CBA-II died for unknown reason. After doing some measurement we found out...
  4. HiltiHome

    Test/Review of King Kong ICR26650 4000mAh (Gold)

    I own a couple of ICR and INR King Kong. All of them can be connected with magnets. I recommend XTAR SP2 charger. Both flat-top and button-top batteries fit and are charged quick and spot on to 4,20V, if You give them a second charge, at 0,5A, after LED went green.
  5. HiltiHome

    Review of / Measurement on AmpMax AM10 Charger

    Thank You for doing another great review. Would You be so kind, to provide a picture of the circuit board. I have a very similar charger sitting here around for review and want to compare.
  6. HiltiHome

    Nitecore i4 charger copy

    To me it does not look like a copy, but a new model from the OEM, that makes the NiteCore charger. The components look the same, but the pcb has a newer date on it. The housing is newer, elegant design, with better grip to 16340 batteries. The vent-holes on the lower side have gone. These...
  7. HiltiHome

    Test/Review of Fenix 18650 ARB-L2 2600mAh (Black)

    Do You have any evidence, or link to "official information" ? May be Fenix uses BAK cells, but judging from the vent-holes, it looks like Samsung cell. I doubt, that BAK cell could outperform nearly all competitors in the 2600mAh class, but that is exactly what HKJs tests show for Fenix 18650...
  8. HiltiHome

    **NEW** XTAR SP2, 2-bay Li-ion Charger

    XTAR SP2 comes with a wall-wart and a 12V car-cord. Have al look at my short review and the pics: http://www.messerforum.net/showthread.php?109992-XTAR-SP2-leistungsf%E4higes-Ladeger%E4t-f%FCr-Lithium-Ionen-Akkus (German language) I rated this charger excellent. Only drawback is the high...
  9. HiltiHome

    **NEW** Fenix ARB-L2 18650 (2600mAh)

    According to the shape of positive contact and the vent holes, Fenix uses Samsung cells. A good choice. Accept Fenix uses Samsung fakes, which I doubt.
  10. HiltiHome

    Jetbeam/Sysmax i4 charger question

    The above manual was provided by SYSMAX, just a few days ago. It's preliminary, not final, so it may indeed have some errors. The yellow label on the backsite of the new i4 says: INPUT: AC 100-240V 50/60Hz DC 12V OUTPUT(MAX) 4.2V +/-1% /1.48V +/-1% 375mA*4 / 750mA*2
  11. HiltiHome

    Jetbeam/Sysmax i4 charger question

    May be, that I'm getting into trouble, posting the new I4 Manual... But anyway, here it is: "TheIntellicharge i4 is a universal, automatic smart-charger compatiblewith almost all types of rechargeable batteries thus eliminating theneed to own several chargers. The i4 is able to...
  12. HiltiHome

    Nextorch MyTorch 18650 (XP-G R5, PC-Programmable) Review: RUNTIMES, BEAMSHOTS+

    Indeed, But You will be pissed, if Your notebook quits USB-function. Heinz
  13. HiltiHome

    Nextorch MyTorch 18650 (XP-G R5, PC-Programmable) Review: RUNTIMES, BEAMSHOTS+

    Selfbuit, You are right. Using an AC-adapter is the way to go. As for the violation of USB specs: The issue with the MyTorch is, that it reserves only 100mA, but draws ~500mA. In case another current hungry device, for example USB-HDD, is connected to the same HUB, the bus-power may be...
  14. HiltiHome

    Nextorch MyTorch 18650 (XP-G R5, PC-Programmable) Review: RUNTIMES, BEAMSHOTS+

    Hi selfbuild, Good review, as always. No offense, but let me point to some discrepancies, I found to my own review. http://www.messerforum.net/showthread.php?t=98333 MyTorch 18650 is not HAIII anodised, it easily scratches using a paper cutter. MyTorch uses mini-USB conector, not micro-USB...
  15. HiltiHome

    Why no Duracell or Rayovac lithium AA's?

    I do not own any Duracell Lithium AA's, but lots of Energizers, lasting for a couple of years... The real world pic was taken by a forums fellow at a food discounter in Austria. At this time Austria is the only European country, where Duracell sells them.
See more

Latest posts

Top