Thanks MAD777 - I appreciate that! :wave:P.S. I'm going to contribute to your battery fund. It's the least I can do to thank you!
Thanks MAD777 - I appreciate that! :wave:P.S. I'm going to contribute to your battery fund. It's the least I can do to thank you!
Could you please tell me what the brightness level (in lumen) after this light stepped down from the highest level?
Sorry I am new and I can't read your charts properly :mecry:
Yes, that's not exactly it. The relative scale of my graphs is not perfectly linear to lumen output (although it's not a bad approximation). You would have to follow the link in the review to where I discuss how to convert the relative scale to estimated lumens to get a more accurate number. If you do this, you will see the step-down level is pretty close to ~4200 lumens. :wave:Seriously, the axis on the left is just relative numbers. What's important is that 200 is twice 100, etc. on the graph. So, the K60 starts out at 750 and drops down to about 660. By dividing 660 by 750 we get 88%.
The new TK75 has four XM-L2s in four reflectors. Each reflector is smaller than each of the three reflectors in the original TK75. If this means that that the new TK75 will have less throw than the original, despite the increased lumens, I will prefer to keep my original TK75.I wonder which one is better. The 5000lm Acebeam K60 or the 4000lm Fenix TK75 2015 edition The K60 has higher output lumens (and higher price, too) but it can't keep that ouput level for so long, while the TK75 can hold maximum output (4000lm) for about 15-20 minutes (I guess) before step down to the lower level. Any advice, please?
Good question, I'm not sure. My review sample came with Acebeam-branded IMR cells, but I don't know how these are commonly being sold.Are these shipping with the batteries included?
It seems like a while ago that I read this review but I've finally ordered the K60. It's my first major flashlight purchase in a few years and I intend to use Eagletac 3500mAh protected cells.
Is anyone else using the Eagletac 3500's with the Acebeam K60?
Are there any potential issues with fitting or current capability etc.?
Thanks ven. The pre-flash is pretty subtle to be honest. On my light, as soon as you turn the ring from 1lm to 50lm, it jumps up to let's say 200lm for 1/10s then back down to 50lm. Most people probably wouldn't even notice it unless it was pointed out to them.
... Must ... not ... get ... K70
Already got some k60vn pics but it will be coming out again for some more this weekend if weather is ok. K70vn/K60vn/tn32UTvn plus more (won't be anything special mind !)