ALL Inclusive: Stock, Modded and inbetween

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.

TOWER IS 902 YARDS AWAY


CONTROL

control.222.jpg


M25C2vnT-Tower illumination-Bulb only


control_tower1.jpg
control_tower1.jpg



K40vn
K40_VN_TOWER_1.9.2018.jpg


TK61vn V4
TK61_VN_1.9.2018.jpg


TN42vn 90
TN42_VN90_TOWER.jpg


TK75vn QUAD SST40
TK75vn_QUAD_FULLLLL_SHOT.jpg
 
Last edited:

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.
^^^

I just noticed CAPO'S head in the bottom left corner of the QUAD PICTURE! He was judging the beam!


M25C2vn T

m25_center_tree_1.9.2018.jpg



K40vn
K40_VN.1.9.2018.jpg




TK61vn V4

v4_center_tree_1.9.2018.jpg


TN42vn 90
TN42_VN90.11.jpg




TK75vn QUAD

TK75_VN_1.9.2018.jpg
 

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.
Weather should be good for photos tonight of Power Line Tower[300 yards] and another tower[410yds.] w/ TK61vn and Tn42VN 90,,,,,and maybe the K60vn XHP70 SD.:D
 

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.
Power pole is 300 yards

TK61vn V4

61._oaks_1.10.2018.jpg


TN42vn 90

tn42vn90_oaks_smokestack.jpg



Tower is 410 yards

TK61vn V4

61_oaks_smoke_1.10.2018.jpg


TN42vn 90

tn42vn90_oaks_tower.jpg





42/61 Tag team


61.42_tag_team.1.jpg



61.42_tag_team.2.jpg


61.42_tag_team.jpg



Robert and Robert The Bearded LUX MONSTERS! :eek:

42.61_bob_and_bob.jpg
 

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.
Final photo session was very enjoyable, impressive and rewarding.:thumbsup:



K60vn XHP70 SD

FINAL_SHOOT_60.jpg




TK75vn QUAD SST40 SD

FINAL_SHOOT_75.jpg




TK61vn V4

FINAL_SHOOT_61.jpg



TN42vn 90

FINAL_SHOOT_42.jpg



FINAL_SHOOT_42.2.jpg



FINAL_SHOOT_42.1.jpg
 

hahoo

Enlightened
Joined
Nov 12, 2011
Messages
918
Location
north carolina
be sure and lock your settings on manual mode for all the pics, per each shoot.
hard to compare pics when the exposure is all over the place.
 

Capolini

Banned
Joined
Aug 4, 2013
Messages
5,945
Location
Valley Forge, Pa.

Final thoughts on the TN42vn 90

Definitely an impressive light. :thumbsup: HUGE hot spot, plenty of throw, nice neutral tint and plenty of spill/flood amounting in more than sufficient peripheral light.

The weather has been cold[except for Friday when it was 62F!]. Being that the run times are short, Heat is not an issue.My guess is that in the summer time you could run it for about 5 minutes on MAX. This prototype is single mode, activate/de-activate by tightening and loosening body.

Disregarding the price. The ONLY down side is the run time. This is to be expected with the amount of power and the lower capacity of VTC5A.

Solution: Have at least Two[2] sets of VTC5A and change them in 15 minutes if you like MAX OUTPUT like me! Same concept as my Modded single cell throwers.


I always do a run time test when I get a new light[even if it is not mine for keeps!]

Batteries- VTC5A

Test: MAX run time/tail stand/no fan/Incremental 5 min. ON, 5 min. OFF.

Starting Voltage-4.21V

Loft Temp- 63F/17C

5 MIN=3.96V
10 MIN=3.80V
15 MIN=3.67V
20 MIN=3.57V

The first 5 minutes is awesome, next 5 is still good. after 10 minutes or so the decrease is noticeable. After 15 minutes[3.67V] it is really noticeable.

Wild guess,,,after 20 minutes the output is probably ~ 60/65% of turn on output. It is still bright enough to use and enjoy.

Thanks again V54 and my friend, cameraman Bob.

Enjoy it LLS ON COWLES MT.!

FINAL_SHOOT_42.1.jpg
 
Top