Aepoc
Enlightened
Has anyone ever bored the hole in a KT1 or KT2 turbohead to accept a 20mm MCPCB? I have an old turbohead with a P4 module that I made a while back... It was a bada** light back in the day but its just so unimpressive at this point. I also have a 20mm tri 219B high CRI star that i've been itching to throw into something. Boring the hole to the proper size and making a new heat sink won't be an issue for me but I'm worried that I won't be happy with beam quality. My favorite thing about this light is the beautiful beam and throw. Does anyone out there have any experience using a single large reflector with 3 emitters? If I were to do this, would I be turning my throw queen into a floodlight? Any tips on focusing?
Also the LEDs are in series and I have very little experience with the 219Bs. I know they can't take much current... Would two 18650s be enough/too much to power them if I use a direct drive or linear driver?
Also the LEDs are in series and I have very little experience with the 219Bs. I know they can't take much current... Would two 18650s be enough/too much to power them if I use a direct drive or linear driver?