ChocolateLab33
Flashlight Enthusiast
who said:Just got my three P3Ds, very quick observations on one sample with various batteries:
2 CR123 – all modes work
2 RCR123 - all modes work
1 unprotected 17670 - all modes work (had to take the wrapper off to fit)
1 14500 – all modes work in L1D body
2 14500 - all modes work in L2D body
2 Ni-MH – barely lights up
1 CR123 - only one mode (low) works in P2D body
The 17670 was measured at 4.10V. The 14500 was 4V.
One 14500 at 3.86V in the L1D body will trigger the low battery warning mode, a very high flashing rate. The regular strobe mode works. All other modes work fine with 3.86V.
Thanks so much!!!