Sold/Expired G4 bi-pin socket by Fivemega (5th Run)

[mvyrmnd]

Paypal sent:

SS Socket - $19
1x WA1160 - $6
International Shipping - $6
Total: $31

TransID: 73F02290V44168941

 

[curtispdx]

I'll take one G4 bi-pin (SS) and two (bi-pin) 1185 bulbs. (I'm also buying two of your Ver2 Deep M*g Reflectors.)

Paypal in a few minutes.

 

[curtispdx]

PM sent.

 

[Ways]

Hi ,

1x SS socket - $19
International shipping - $6

$25

 

[twinturbo]

I have two Maglite 3D and would like to customize the Mag's to increase the output of light.
I have seen that you seem to have your act in order and need your help with the parts needed.
Can you help me out?
thank you so much for all that you do

 

[fivemega]

I have two Maglite 3D and would like to customize the Mag's to increase the output of light.
I have seen that you seem to have your act in order and need your help with the parts needed.
Can you help me out?
thank you so much for all that you do

[size=+1]To make a M*g85, everything you need including 9AA to 3D battery holder, bi pin socket, WA1185 bulb, glass lens and aluminum reflector are available here.[/size]

 

[737mech]

for one SS G4 bi-pin socket for Mag

 

[hoongern]

1x SS G4 socket $19
1x FM1909 bulb $16
Shipping International $6
Total: $41

Please send to MALAYSIA as noted in paypal notes. Thanks!

 

[Bob96]

Sending Paypal for:
2 X G4 - S.S. Bi Pin Socket = $38

#5 Chrome Plated 3 X 18650 Light = $108

Extra Light Switch = $4

Extra Light Boot = $1

Shipping = $6

Total = $157
BOB96

 

[electromage]

1X SS Socket $19
2X WA1185 $6
Shipping $4

Total: $35

 

[lemlux]

3 @ SST Sockets $53
Shipping $ 4

Total $57

Paypal Sent on 6/3/2010.

Thanks.

 

[Justin Case]

FM, is there enough resistance in a 2D Mag to run an 1185 with your bi-pin socket using 3xIMR26500? In post #1 of your sales thread, what battery configuration did you use to run the 1185 for 50 min?

 

[ElectronGuru]

FM, is there enough resistance in a 2D Mag to run an 1185 with your bi-pin socket using 3xIMR26500?

Not sure about 2D's, but I've tried this with a 3C setup. Even with long rested the cells, this is a high risk of poof on startup with 4.2 charged cells and the factory switch.

 

[Deputy T.]

Paypal Sent for:

1xStainless Bi-Pin Socket
2xWA1185 Bulbs
U.S. Shipping

$19.00+$12.00+$4.00=$35.00

 

[fivemega]

FM, is there enough resistance in a 2D Mag to run an 1185 with your bi-pin socket using 3xIMR26500? In post #1 of your sales thread, what battery configuration did you use to run the 1185 for 50 min?

Three healthy and fully (4.2 Volt) charged up 26500 cells will most likely instaflash WA1185
I highly recommend soft start switch or 4.1 volt cells to reduce risk of instaflashing.
WA1185 needs a battery pack of Lithium Cobalt at 11.1 volt, 3300mAh to get 50 minutes of safe run time like this.

 

[Justin Case]

Three G4 bi-pin sockets, $53
Two mineral glass lenses (I forgot to add these to my Ver2 Deep Reflector order), $5
Six WA1185 bi-pin bulbs, $36
Five FM1909 bulbs, $80
Five Phillips 5761 bulbs, $30

Shipping, $4

Total, $208

 

[iflyjts]

(1) x G4 SS socket = $19
(6) x FM1909 blubs = $96
Shipping = $ 4
TOTAL = $119.00




thanks,

iflyjts :thumbsup:

 

[Light Brite]

sent for:

1pc. SS Bi-Pin socket
1pc. BP 1160 bulb
1pc. BP 5761 bulb
1pc. BP 1185 bulb

19 + 6 + 6 + 6 + 4 ship = $41.00

Thanks

 

[makgq]

Stainless steel socket $19
bi-pin WA1185 $6
international shipping $6
total $31

-----
order received, thank you

 

[Battery Guy]

Stainless steel socket X6: $104 ($19 for first, $17 additional)
Shipping: $4
Total: $108


Cheers,
Battery Guy