Wuben A21. I think they have some Olight in them
Have one of this in a triple. Its just OK as a stock light.
You can become a Supporting Member.
Wuben A21. I think they have some Olight in them
Hey Vinh, ever consider modding any RonyVon products? They look really well built, and somehow still, the prices look very reasonable!
https://www.rovyvon.com/collections/flashlight/products/a4?variant=12234913054823
https://www.rovyvon.com/collections/flashlight/products/angel-eyes-e300s?variant=12870511001703
Thoughts? I could see W1/W2 doing really well in the Aurora and Angel Eyes lights using those optics!
Also, the Fénix E16/E18 is claiming to have a special optic reflector of 3mm as opposed to the 'usual 7mm,' could this make an interesting beam pattern with a particular LED? Special TI wacky HDT version coming too if you like that sort of thing for collectibility.
I ordered 3
I want oneRRT01 came. Played with it for 1 minute and I already know this will be an R! Excellent light. The best of infinite variable brightness with a very linear ring, the lowest low possible, 18350 Protected capable and crazy nice heft!!
I want one
I concur. I'd definitely purchase this mod from you as well.
I don't yet have the new RRT-01. However, the old RRT-01 was surprisingly easy to turn into a triple.
The RRT-01 / TCR-01 used a 14mm star with a reflector. The star was far too small for a triple. However, there was a ledge partway up the reflector cavity where a wider portion of the reflector sat. This ledge happened to be at exactly the correct height for a standard 20mm copper triple star with standar Carclo triple-TIR optic on top.
The driver wires weren't long enough for a triple, but it wasn't too hard to replace the stock wires with longer ones. On my driver I had to first desolder each leg of the sandwich, then separate the 2 boards. Then I could access the driver wire solder points to attach different wires. This mod still left a large open cavity below the star, but so long as a copper star with generous thermal compound at the edges was used, heat transfer wasn't a problem. Though I suppose the "right" way to do it would be to install a copper slug into this void.
I have no idea if the new RRT-01 is as easy to turn into a triple as the old one.
I sure hope it is. I need a variable ring triple in my life. 4500 219b's please.
Emisar D18 looks like a good one to mod.
Replace the SST-20 with XPL HI or LH351D.
My guess is around 16,000 lumens in a light similar in size to the ROT66.
Emisar D18 looks like a good one to mod.
Replace the SST-20 with XPL HI or LH351D.
My guess is around 16,000 lumens in a light similar in size to the ROT66.
I just received a couple Austrolux FT03 in cool white. Pretty impressive, I'd love to see what Vinh can do to one.