You can become a Supporting Member.
They are in the moddoolar parts section
The optic menus are the same constructive elements, added to all light/head/option pages.I'm looking, but those 3 do not seem to be the same from what I can tell. They are different names than the frosted medium and frosted wide in the Moddoolar section.
....
Dan sent me a couple of the new optics so I've been able to play around with the new optics a little bit over the past week or two. I can easily say they each produce a distinctly different beam pattern and I appreciate having these options when configuring a flashlight. I think this selection of optics will make a bunch of us pretty happy!
....
.... All versions of the Carclo optic are readily available and very cheap so it wouldn't break anybodies bank to purchase a few different ones and try them out. I've even considered messing with some of the elliptical to see what they do to the beam.
So what we need is white wall shots to show artifacts.
The optic menus are the same constructive elements, added to all light/head/option pages.
Please let me know if you don't see this in both places:
- Narrow Clear (max throw)
- Medium Frost (clean throw)
- Wide Frost (even flood)
seems like you can. click on the "moddoolar parts" in the moddoolar section. its got bezel rings, lenses, tail clips and optics.Just wanted to see if I can order the optics now for the current head I own. Seems like it is not possible, but would love to do so. Thanks!
Looks good to me, and something about the red makes the details standout. Nice presentation, just need to get you a medium to add to the list!I am not a professional photographer, and I think these might be my first ever attempt at posting beamshots.
So, with that disclaimer, I think the following does provide a rough approximation of what I see ...
Just wanted to see if I can order the optics now for the current head I own. Seems like it is not possible, but would love to do so. Thanks!
Looks good to me, and something about the red makes the details standout. Nice presentation, just need to get you a medium to add to the list!
....
Btw, there seems to be interest in ordering full sets. So I may locate a single carrying case with 4 to 6 slots. Keep things organized!
Thanks! Was wondering as well if the original is same as the narrow clear listed. Didn't want to duplicate what I already have.Looks good to me, and something about the red makes the details standout. Nice presentation, just need to get you a medium to add to the list!
Sorry for the confusion. We have dozens of each ready to ship:
1) visit this page (http://www.oveready.com/prod_289.html)
2) scroll down to the options section
3) click on the optic menu
4) choose the optics you would like
Btw, there seems to be interest in ordering full sets. So I may locate a single carrying case with 4 to 6 slots. Keep things organized!
Dan,
I have a Wasp head from a drop you had earlier in July. The optic I chose was the UCL(Ultra Clear Optic) Is this actually different from the above, "Narrow clear"? I would like a bit more throw.
Also, how hard is it to remove the current bezel to replace the optic?
Thanks
So does that mean we shouldn't do DIY optic swaps? I'd better cancel the multiple optics I've just ordered then...
So does that mean we shouldn't do DIY optic swaps? I'd better cancel the multiple optics I've just ordered then...
Jim's correct. Until yesterday, 100% of v2, v3, v4, and v5 triples shipped clear narrow. The 'lens' is really just an old name for a protective window that sits above the lens. It will not change focus unless it was of the frosted variety.
So you most likely have a clear/narrow + clear, the maximum possible throw with an XPL setup. We are considering introducing a new smaller LED that would throw much better, but like the 219 would have less max watts.
BTW, optic swapping is limited to controlled architecture setups. This means drop ins are not eligible and will be configured when Tom finishes them. That means drop ins can be either multiple LED or multiple optics, we can't risk doing all combinations of both (12+ models).
Exactly correct. Sorry for the confusion.I think Dan means that when the v5s are available in the P60 drop in format, the optics will be permanently installed inside and non-user swappable. They won't be making P60s in sets of narrow, wide, medium optics cos they may not all sell. If you ordered the WASP heads, then you can easily swap them.
You almost most likely won't be able to swap optics with the E2E copper either.
I would be interested in a custom Carclo optic storage case, too !
The storage case is a great idea.